NefMoto > Technical > Flashing and Chipping > apr ecu swap with stock ecu???
Pages: [1]
« previous next »
Author Topic: apr ecu swap with stock ecu???  (Read 4596 times)
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« on: August 14, 2016, 07:14:04 PM »
Hey guys so i purchased a apr ecu my wifes daily driven 03 a4.But i have a question.Can apr immobilizer clone tool read the immo data from a apr tune ecu and a stock ecu??I just need to clone the immobilizer rather than do the defeat immo.Just wondering if anyone has done it this way or if i shouldnt bother and use different software to clone??
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #1 on: August 14, 2016, 08:53:14 PM »
apr tune = contact apr for support using their tools.
Logged
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« Reply #2 on: August 16, 2016, 07:18:53 AM »
Ok so I was able to adapt the ecu using other tools.apr software won't work unless you use a true serial cable.

I am experiencing a different problem.The car bucks like crazy when in sixth gear when accelerating or slowing down.But only in 6th gear.Could this be because the ecu I got came out of a 5 speed manual car??I doubt it.Just looking to see if it has anything to do with the ecu.Ecu ends in ak the original was a bc.Anyone??


Sent from my iPhone using Tapatalk
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: August 16, 2016, 07:39:50 AM »
Quote from: EuroXs4 on August 16, 2016, 07:18:53 AM
Ok so I was able to adapt the ecu using other tools.apr software won't work unless you use a true serial cable.

I am experiencing a different problem.The car bucks like crazy when in sixth gear when accelerating or slowing down.But only in 6th gear.Could this be because the ecu I got came out of a 5 speed manual car??I doubt it.Just looking to see if it has anything to do with the ecu.Ecu ends in ak the original was a bc.Anyone??


Sent from my iPhone using Tapatalk

apr software = contact apr for support with issues.
Logged
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« Reply #4 on: August 16, 2016, 07:46:28 AM »
I think you should!!


Sent from my iPhone using Tapatalk
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #5 on: August 16, 2016, 09:59:59 AM »
Quote from: EuroXs4 on August 16, 2016, 07:46:28 AM
I think you should!!

Huh?
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209
« Reply #6 on: August 17, 2016, 04:01:57 AM »
Nothing much got it resolved.Reflashed ecu to a BC 0040 software level then reloaded the ape flash works like a charm.


Sent from my iPhone using Tapatalk
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 03:39:55 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)