naach_
Full Member
Karma: +3/-2
 Offline
Posts: 55
|
 |
« on: August 15, 2016, 09:18:57 AM »
|
|
|
good afternoon guys , first remind you that use google translator , so sorry for any errors .
Alright guys , finally I got my install 1.8T AEB , the entire APU harnes engine with 032 ecu HJ golf mk4 , and all its components , electronic throttle map, and all its components , all pinout and car booted off inmo but I have a number of problems , apart from failures due to lack of components, such as N249 , N112 , VVT , second sensor o2 typical ,I have a series of failures that I think are influencing the adaptation of the mixture first probe lambda broadband this pineada and measuring well according VAGCOM compared to external wideband I have installed, mount injectors 343-4 EV6 bar, linearizing with krkte, but channel 32 of adjusting VAGCOM not adapted, the engine in idle state has a afr 12.3, it may be that by not bringing the actuator VVT, so do not want to adapt the mix, the canister is connected, I I'm going crazy, there is possibility of canceling the ecu that ruling and the rest of the error DTCs easy way? Then we ready faults that gives me, I hope can help me, greetings and thanks in advance
17526-p1523- abs crash signal for controller-open circuit
17841-p1433-secondary air pump relay (J299) -open circuit
17939-p1531- camshaft timing open circuit adjustment-
17840-p1432-secundari air Inyection open circuit solenoid valve-
17695-p1287-bost presure valve (N249) -open circuit
18057-p1649-powertrain data bus, implausible signal controller for abs
18058-p1650-poertrain data bus, missing message for instrument cluster
the question is trying to figure out why not try to adapt mix, thanks and best regards,
|
