Pages: [1]
Author Topic: 8D0907551M - ESKONF location  (Read 5281 times)
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« on: August 24, 2016, 11:16:22 AM »

I feel silly asking for this because I am sure it's on here somewhere, but can someone please give the location of the 13byte ESKONF map in this file?

Bonus points for posting the stock hex of this map.

8D0907551M  01 0261207143-1037-360857 0002    6mt NA  S4 APB
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: August 24, 2016, 11:36:31 AM »

wiki?

Quote
Finally if you intend to disconnect the sensors, configure ESKONF (13 bytes starting at 0x10C75):[60]. If you intend to leave the sensors installed and connected, there is no need to disable circuit diagnosis.

    ESKONF[5] (0x10C7A) - set to 0xC0 (set bits 6 and 7)
    ESKONF[6] (0x10C7B) - set from 0xF3 to 0xFF (M-box) (set bits 2 and 3)
    ESKONF[6] (0x10C7B) - set to 0xC3 to 0xCF (L-box) (set bits 2 and 3)
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #2 on: August 24, 2016, 11:45:24 AM »

It was hidden!  But now you can search on NEF and find it too!

I will follow up with my own bonus points later.   Thanks k0mpresd!

stock hex for reference:

00   FC   E3   FF   3C   00   F3   FF   AA   FA   55     55   55
« Last Edit: August 31, 2016, 03:52:52 PM by SB_GLI » Logged
cbr-
Jr. Member
**

Karma: +0/-3
Offline Offline

Posts: 30


« Reply #3 on: June 22, 2017, 09:14:47 AM »

Is that change correct to disable EVAP ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.052 seconds with 17 queries. (Pretty URLs adds 0s, 0q)