NefMoto > ECU Files > ECU Definition Files > 4B0906018M OLS and stock bin file
Pages: [1]
« previous next »
Author Topic: 4B0906018M OLS and stock bin file  (Read 5772 times)
Benjidc
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 5
« on: September 06, 2016, 11:36:13 PM »
attached is my stock bin file from a b5 a4 awm manual as well as an ols file ive been working on. if anyone can take a look at it and see if i have the correct map addresses and if anyone feels like converting it to an xdf i would be mucho appreciato as i cant gert the .jar converter to work for me.
Logged
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178
« Reply #1 on: January 20, 2021, 01:53:32 PM »
Quote from: Benjidc on September 06, 2016, 11:36:13 PM
attached is my stock bin file from a b5 a4 awm manual as well as an ols file ive been working on. if anyone can take a look at it and see if i have the correct map addresses and if anyone feels like converting it to an xdf i would be mucho appreciato as i cant gert the .jar converter to work for me.
(Audiquattro44)This guy converted your (Benjidc) .ols for me i didn't do anything just linked up with him and he helped me free of charge now there is a xdf of m-box 1.8t.. I hope this helps someone else im gonna put the conversions here....
« Last Edit: January 20, 2021, 02:29:23 PM by doublerwest » Logged
W357
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178
« Reply #2 on: January 20, 2021, 02:01:52 PM »
Quote from: doublerwest on January 20, 2021, 01:53:32 PM
(Audiquattro44)This guy converted it for me i didn't do anything just linked up with him and he helped me free of charge now there is a xdf of m-box 1.8t.. I hope this helps someone else im gonna put the conversions here....

I would appreciate if someone took a peek into this to make sure i didn't mix it up with another file i cant tell if i did or not.. Ill keep comparing with ch box until otherwise told its bad.The 4b0906018m neu.xdf looks fine from what i can tell but im not that experienced yet. The other file looks strange in tvub so some things may not have lined up but its a starting point.
« Last Edit: January 20, 2021, 03:04:35 PM by doublerwest » Logged
W357
Auriaka
Full Member
***

Karma: +17/-2
Offline Offline

Posts: 113
« Reply #3 on: January 20, 2021, 09:41:50 PM »
The regular M one does not match the ORI listed above. Values are screwy everywhere. Looking at the listed above ORI the KFZW axis are jacked using the NEU xdf listed.
Logged
doublerwest
Full Member
***

Karma: +5/-4
Offline Offline

Posts: 178
« Reply #4 on: January 21, 2021, 11:30:28 AM »
Quote from: Auriaka on January 20, 2021, 09:41:50 PM
The regular M one does not match the ORI listed above. Values are screwy everywhere. Looking at the listed above ORI the KFZW axis are jacked using the NEU xdf listed.
Thank you for taking a look at it Auriaka! ya im not sure what happened the kflbts looked right on one..But I must have either mixed up some strange ols file and nothing lined up or the conversion didn't line it up correct dang..Back to the drawing board with the conversion....
Logged
W357
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 29, 2024, 03:11:29 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)