Pages: 1 [2]
Author Topic: 2.0t FSI Stalling off load.  (Read 12473 times)
turbo944s2
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 59


« Reply #15 on: September 21, 2016, 06:43:27 PM »

Things are looking up! Pressure tested the system up to 20 PSI. Found a couple of boost leaks, the vacuum line to the divertor valve(deleted the electric divertor) one of the intercooler pipes had a slight leak. Friend smoothed out some of the maps, car runs much better. It still stalls though.... I sure wish someone could help me get rid of this catalytic convertor warming cycle. Any help would be greatly appreciated.
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #16 on: September 22, 2016, 04:22:24 AM »

Post file and I'll take a look
Logged
turbo944s2
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 59


« Reply #17 on: September 23, 2016, 04:58:25 AM »

Post file and I'll take a look

Will post it up tonight.
Logged
turbo944s2
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 59


« Reply #18 on: September 23, 2016, 02:58:18 PM »

Here is the file to my stock ecu.
Logged
turbo944s2
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 59


« Reply #19 on: September 26, 2016, 06:09:17 PM »

http://nefariousmotorsports.com/forum/index.php?topic=9928.0     

I just set CWKOMABG to zero, started up the car it was idling around 1200, it didn't go up to 2k like it normally does. I will do some further investigation tomorrow.
Logged
turbo944s2
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 59


« Reply #20 on: November 09, 2016, 04:53:34 PM »

Someone please take a look at this log. If you could assist me in preventing the stalling it would be greatly appreciated.
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)