NefMoto > Technical > Flashing and Chipping > ME 7.1.1 ST10 CRC
Pages: [1]
« previous next »
Author Topic: ME 7.1.1 ST10 CRC  (Read 7432 times)
jameswalker
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 39
« on: September 13, 2016, 03:32:38 PM »
Evening all,

What is the best way to correct CRC for the ST10? None of the tools I have found on this site have given me any joy. It seems the ST10 is its own beast!

Thanks,
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449
« Reply #1 on: September 14, 2016, 05:14:20 AM »
Either original winols with st10 crc plugin or any good flashing tool will correct it while writing.Cmd and ktag does the job fine.
Logged
jameswalker
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 39
« Reply #2 on: September 16, 2016, 02:39:00 AM »
Is that the "Visteon ST10" plugin? (811)

Or the one which matches my vehicle more closely: "Bosch ME7-2006 VAG" (820)?
Logged
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6038
« Reply #3 on: September 16, 2016, 02:43:08 AM »
Visteon is something else entirely.

Also, I am not so sure that WinOLS corrects the checksum for the processor. I remember trying a few years ago and did not manage to get it to work.
Maybe something has changed since then. Back then I just turned the checksums off.

IIRC the checksums are stored in the flash, so whatever tool you use must take both the processor and the flash file.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
jameswalker
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 39
« Reply #4 on: September 16, 2016, 07:57:50 AM »
Quote from: prj on September 16, 2016, 02:43:08 AM
Visteon is something else entirely.

Also, I am not so sure that WinOLS corrects the checksum for the processor. I remember trying a few years ago and did not manage to get it to work.
Maybe something has changed since then. Back then I just turned the checksums off.

IIRC the checksums are stored in the flash, so whatever tool you use must take both the processor and the flash file.

So how do you manage to ST10 CRC now? The tool you use does it automatically?

Furthermore, why would I need both a read of the MCU, plus flash? If I just wanted to make changes to the flash? So far I have only successfully read the 1mb flash file. I am not even aware of a method for reading the MCU. But... it was my impression that the ST10 boots and loads from the flash, the flash is pretty much an extension of the ST10 in this case.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449
« Reply #5 on: September 17, 2016, 02:29:25 AM »
Mpc (Mcu) can be read in boot mode with various tools.However if you just like to tune the maps inside the flash you don`t need anything else than just your flashing tool which will do your checksum automatically .Your questions could be answered correclty if you just tell us what you need to do..
Logged
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6038
« Reply #6 on: September 17, 2016, 06:47:46 AM »
Quote from: jameswalker on September 16, 2016, 07:57:50 AM
So how do you manage to ST10 CRC now? The tool you use does it automatically?
If you just want to modify the flash there are a million tools for that.
Quote
Furthermore, why would I need both a read of the MCU, plus flash?
If you want to modify code stored in the MCU.
Quote
If I just wanted to make changes to the flash?
Then you don't.
Quote
it was my impression that the ST10 boots and loads from the flash
You would be wrong.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
dream3R
Hero Member
*****

Karma: +18/-8
Offline Offline

Posts: 1194
« Reply #7 on: September 18, 2016, 12:25:12 AM »
Any tool  for the ST10 proc will correct the sum in the eep
Logged


How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
gt-innovation
Sr. Member
****

Karma: +60/-91
Offline Offline

Posts: 449
« Reply #8 on: September 20, 2016, 06:13:05 AM »
FYI ktag (latest original version) does not correct the mpc of an st10f275 (r32 - 3.2) in boot mode writing.
It also does not recognize the checksum of the flash if it has been already tuned by another tool in my case (my cmd).
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 03:50:46 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)