NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > What is A2L Files?
Pages: [1]
« previous next »
Author Topic: What is A2L Files?  (Read 6251 times)
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« on: September 21, 2016, 03:43:34 AM »
Hello,

What is A2L files and what can i use them for? Is this the file that defines the code stored in the MCU?

I Opened a Me7.5 A2L file and what i find is some sort of assembler code.

In the pic below i took a screenshoot from my A2L file from Me7.5.. 

"relative Luftfullnung"

What does Limit (0 . 191,25%) mean?


//
Logged
E85oholic
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: September 21, 2016, 11:12:29 AM »
Quote from: Jim_Coupe on September 21, 2016, 03:43:34 AM
What is A2L files and what can i use them for? Is this the file that defines the code stored in the MCU?

It documents variable and map locations in the ECU flash image, among many other things. It forms the basis from which many publicly available auto-generated .kp and .xdfs come from.

Quote
"relative Luftfullnung"

rl = load

In that case, the 8-bit load.

Quote
What does Limit (0 . 191,25%) mean?

In many European languages, "," is the decimal point

So (0 . 191,25%) is 0 - 191.25%

Note that 16-bit rl_w can go higher than 191.25%
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #2 on: September 22, 2016, 04:56:49 AM »
Quote from: nyet on September 21, 2016, 11:12:29 AM
It documents variable and map locations in the ECU flash image, among many other things. It forms the basis from which many publicly available auto-generated .kp and .xdfs come from.

rl = load

In that case, the 8-bit load.

In many European languages, "," is the decimal point

So (0 . 191,25%) is 0 - 191.25%

Note that 16-bit rl_w can go higher than 191.25%

Nice info, what A2L viewer do you recommend?
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400
« Reply #3 on: September 22, 2016, 10:45:45 AM »
http://nefariousmotorsports.com/forum/index.php?topic=5912.0
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #4 on: September 24, 2016, 01:10:30 PM »
Why do they use one that is 8bit byte and one that is 16bit WORD? for use elsewhere i guess..
Logged
E85oholic
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136
« Reply #5 on: September 29, 2016, 08:58:12 PM »
Quote from: Jim_Coupe on September 24, 2016, 01:10:30 PM
Why do they use one that is 8bit byte and one that is 16bit WORD? for use elsewhere i guess..
Would it be, that the ecu has rl or rl_w not both. Which does r32 7.1.1g have?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #6 on: September 29, 2016, 09:52:30 PM »
Most have both.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136
« Reply #7 on: September 29, 2016, 10:32:35 PM »
Quote from: nyet on September 21, 2016, 11:12:29 AM
Note that 16-bit rl_w can go higher than 191.25%
So maps with 8-bit load axis stop that 191.25% and 16-bit load using stuff goes above. Does the ecu work good above 8-bit values besides some maps are at max?
Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663
« Reply #8 on: September 30, 2016, 11:23:24 AM »
I guess they work but not to high above... I have expanded my load axis... All after that i think ECU extrapolates the last value.
Logged
E85oholic
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12270


WWW
« Reply #9 on: September 30, 2016, 11:25:44 AM »
Quote from: Jim_Coupe on September 30, 2016, 11:23:24 AM
I guess they work but not to high above... I have expanded my load axis... All after that i think ECU extrapolates the last value.

No. Map lookups ride the edge, they do not extrapolate. Don't believe me? Go look at the map lookup ASM Tongue

By definition you can't "expand" an 8-bit load axis. Not sure what you think you did Tongue
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 02:53:17 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)