Pages: [1]
Author Topic: What limit maps/constants need to be adjusted to allow higher boost via MBC/EBC?  (Read 11045 times)
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565



What limit maps/constants need to be adjusted to allow higher boost via MBC/EBC?

I'm not talking about tuning a higher requested torque just yet. But allowing a higher boost via external control (MBC/EBC).

I'd like to discuss in stages.

1st stage) boost higher than stock 'boost' limit, but below max 'torque' limit.
2nd stage) boost high enough to exceed max 'torque' limit.

Assuming injectors/MAF/MAP are calibrated.


Stage 2 might flow into the subject of tuning a higher requested torque which I'll like to avoid for this discuss. Or adjusting AFR/timing.

Thanks,
Rey
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3



You need to:
-increase the allowed boost deviation (deviation of actual boost from desired boost)
-increase the allowed airflow (max airflow for the given RPM)

I think that is it if I recall correctly.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
boomerro
Full Member
***

Karma: +4/-8
Offline Offline

Posts: 69




-increase the allowed airflow (max airflow for the given RPM)

what map is this?
Logged

The goal of this site is to openly discuss ME7 tuning and promote good practices.
boomerro
Full Member
***

Karma: +4/-8
Offline Offline

Posts: 69




is that MLMAX?
Logged

The goal of this site is to openly discuss ME7 tuning and promote good practices.
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565



You need to:
-increase the allowed boost deviation (deviation of actual boost from desired boost)
-increase the allowed airflow (max airflow for the given RPM)

I think that is it if I recall correctly.


- ELDOB (currently 50 hPa / .73 psi) ?
- Huh any hint to max flow/RPM map you're talking about

Thanks,
Rey
« Last Edit: July 02, 2010, 03:47:17 PM by elRey » Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3



KFMLDMX is the air mass limit for diagnosis.

Sorry for the late reply.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
elRey
Hero Member
*****

Karma: +32/-1
Offline Offline

Posts: 565



Thank you again.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12271


WWW

There is zero good reason to do it this way.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.028 seconds with 17 queries. (Pretty URLs adds 0s, 0q)