Hello All,

I have tried to search the forum and google, but cannot fine exactly what i'm looking for. The motor has been swapped onto the B6 and using the stock 01E transmission. So far no issues, but I have no idea which tune the previous owner was using, the previous owner also has no idea either. The idle is very rich. I am upgrading the exhaust to have a high-flow car and O2 sensors post cat, as currently there are none. So far the ECU is only using the EGTs up top.

I want to make sure I know what the ECU is doing and have a better tune for the mods the car has. I would not mind a decent amount of boost and power delivery and good pedal response. So far the car seems to pull harder in third than in second. Like my old ALH TDI with stage 2 type torque.
Currently the box is set as(pulled from VCDS) an 8D0 907 551 M

Ko3s running fine
3" DPs onto 2.5" piping all the way back with Magnaflow 2.5 flow-throughs
4LB FPR
Stock injectors
FSI coils
K&N Cone filter
Powrhous DVs with yellow Forge springs
XSpower Intercoolers(the revised ones)

Any help will be appreciated.


E

You didn't spot the 2nd sticky in this forum?

http://nefariousmotorsports.com/forum/index.php?board=2.0

Maybe I skipped it. Edit; read it partly.  Still trying to spot the right files and what will work.  Will probably upgrade to the Chinese k04s next spring.

Oh for sure. I just figured there would be a repository of tried and trued files to tweak and try or a reference guide for such conversion. Still have tons to read on here and search.


Sent from my iPhone using Tapatalk

The heavy smell of gas for now.  Much better after I replaced the fpr though. Ordered a wideband to get actual readings.


Sent from my iPhone using Tapatalk