Pages: [1]
Author Topic: hi cant read write  (Read 10429 times)
Jako
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: September 29, 2016, 09:38:46 AM »

Hi there,

Im just wondering what I need to do to read & write flash. I can connect, but when I go to kw2000 flashing tab, there is read and write in grey ( both fast and slow, can't press on button) is it something wrong with my cable or my computer? I have xp. Thanks for help
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: September 29, 2016, 09:45:35 AM »

You have to connect first.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Jako
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #2 on: September 29, 2016, 10:32:48 AM »

you mean press connect first? yes I did it all went good and I was connected but read write was still grey
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: September 29, 2016, 11:15:53 AM »

Did you select a file?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Jako
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #4 on: September 29, 2016, 11:44:07 AM »

I need select file to read my ecu? I want to read not to write
Logged
atdub
Full Member
***

Karma: +4/-3
Offline Offline

Posts: 144


« Reply #5 on: September 29, 2016, 12:02:00 PM »

I need select file to read my ecu? I want to read not to write

You absolutely need to select a file to write to your ecu also make sure you have the correct memory layout. I also would strongly recommend reading Nyet links and more information on this site before attempting to do either.     
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #6 on: September 29, 2016, 12:08:49 PM »

He's not writing a file.  You don't need to specify a file to read.  There's a connect button top right, click that. 
Logged
Jako
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #7 on: September 29, 2016, 12:25:58 PM »

Ok now I see I select file and memory and connected now I can press read. But before I do it what memory layout is audi a3 8l 110km asv?
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #8 on: September 29, 2016, 01:51:38 PM »

Diesel?
Logged
Jako
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #9 on: September 29, 2016, 05:44:42 PM »

yes, 81kw. I tested all and none of them working its connecting in dump mode and then stuck on reading... after 2-3 min I canceled it and try different memory layout without success. I have 2 cable vag kkl (not working) and vag-k+can(working)
« Last Edit: September 29, 2016, 05:51:19 PM by Jako » Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #10 on: September 29, 2016, 11:43:12 PM »

Nefmoto cannnot read diesels.
Logged
Jako
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #11 on: September 30, 2016, 01:00:58 AM »

Adam thanks for your help. Do you know any different software to read my ecu?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #12 on: September 30, 2016, 08:35:47 AM »

MPPS/Kess/Galetto
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.114 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)