Hi Everyone!
I decided to change my red/yellow instrument cluster with a color one, but I have been unable to extract its SKC. I have tried several different methods to extract it through the OBD2 diagnostic port, including:
• Using VAG K+CAN Commander v2.5, v3.6 and v5.5 + Pin Reader.
• VAG EEPROM Programmer v1.19g with a blue KKL cable.
• ABRITES AVDI Diagnostics (I went to a professional for this one)
All of them failed to extract the pin code, so I decided to get an EEPROM programmer, desolder the 24C08 chip and read the EEPROM. I did the same for my new color instrument cluster. The problem is that the EEPROM on all RB4 and RB8 clusters is encrypted. I don’t have a tool that would decrypt from a dump file. I tried the site
http://www.audi-crypto-tools.co.nf/ but it turned out to be a scam. All the site does is collect EEPROMs.
I would be really grateful if someone can extract the SKC from my old RB8 cluster and tell me how to virginise the new RB4 one!
Thanks in advance!
Here is all the info
Old Red/Yellow Cluster:
8E0 920 901 E
Bosch RB8
IMMO4
EEPROM: See the first attached file. (You need to log in to the forum in order to see it.)
New Color Cluster (used, bought from allegro.pl)
8E0 920 931 E
Bosch RB4
IMMO4
EEPROM: See the second attached file. (You need to log in to the forum in order to see it.)
