Pages: [1] 2 3
Author Topic: KRKATE TTRS/RS Please  (Read 24716 times)
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« on: October 26, 2016, 06:43:57 AM »

Hi

Anyone help with KRKATE for the TTRS/RS3 file attached please. I know we want something for nothing, so I have attached the something in payment..

I'm working on using the RS3 injectors on the 2ltr Tfsi and worked out pretty much all the maps needed but can't narrow down the KRKATE. I think its somewhere around 0x1DEA3C but no sure exactly where..

As compensation in helping, I have attached an XDF with most of the injector maps setting for the 115B/018H and of course the TTRS/RS3 to help those looking to use the injectors.( no axis, but you can work those out if needed!)

Also when its been answered can it be merged with the EOI Thread please as it's more relevant there..


Edit.

Ttrs file herehttp://nefariousmotorsports.com/forum/index.php?topic=7119.0

 
« Last Edit: October 26, 2016, 06:55:11 AM by littco » Logged
IamwhoIam
Hero Member
*****

Karma: +43/-99
Offline Offline

Posts: 1030


« Reply #1 on: October 26, 2016, 08:20:01 AM »

KRKATE is located at 0x1DEA80, factor 0.000010416667
Logged

I have no logs because I have a boost gauge (makes things easier)
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #2 on: October 26, 2016, 08:57:00 AM »

KRKATE is located at 0x1DEA80, factor 0.000010416667

Thank you..
I Wasn't far off then..

Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #3 on: October 26, 2016, 09:27:27 AM »

What are the part #s of the injectors you're trying? AFAIK the RS3 injectors being used in the 2.0 TFSI are from the 8V RS3 with MED17. That ORI is from an 8J TTRS (MED9.1)
Logged
lepatron972
Full Member
***

Karma: +3/-16
Offline Offline

Posts: 92



« Reply #4 on: October 26, 2016, 11:24:49 AM »

they are the same 8P or 8V
031L replaces 031H
Logged

lepatron972
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #5 on: October 26, 2016, 11:27:04 AM »

What are the part #s of the injectors you're trying? AFAIK the RS3 injectors being used in the 2.0 TFSI are from the 8V RS3 with MED17. That ORI is from an 8J TTRS (MED9.1)

Hi, Yes the 8V are the ones going to be used

07K906031L to be exact.

However I am yet to find the med17 original file from the engine to get the exact maps off so thought I'd spend my time at least getting something IE off the 8J and whilst I appreciate they are not the same it does help when comparing the CDL to 8J injectors to see how the maps vary..

If anyone has the med17 8V map handy I will happily crack on getting those maps as well if they are at all different, but the looks of the injectors are the same so figured the maps are as well

Logged
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #6 on: October 26, 2016, 11:28:35 AM »

they are the same 8P or 8V
031L replaces 031H

Well there you go... Answers that one.. Thank you
Logged
lepatron972
Full Member
***

Karma: +3/-16
Offline Offline

Posts: 92



« Reply #7 on: October 26, 2016, 11:58:55 AM »


I buy 031L for mounting on my Leon cupra CDLD 1P0907115AB
Logged

lepatron972
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #8 on: October 26, 2016, 12:10:35 PM »


I buy 031L for mounting on my Leon cupra CDLD 1P0907115AB

I've seen they need an adaptor on the actual injector to fit in the head.. do you know where these can be bought?
Logged
lepatron972
Full Member
***

Karma: +3/-16
Offline Offline

Posts: 92



« Reply #9 on: October 26, 2016, 12:25:49 PM »


everything you need is here
Logged

lepatron972
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #10 on: October 26, 2016, 12:44:13 PM »


everything you need is here


Thanks , I've looked and all I can see is a bracket type fitting no.24 where as in the picture you see billet collars
Logged
lepatron972
Full Member
***

Karma: +3/-16
Offline Offline

Posts: 92



« Reply #11 on: October 26, 2016, 12:53:07 PM »

I get the aluminum ring original injector they can be mounted in place on the RS3
Logged

lepatron972
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #12 on: October 26, 2016, 01:01:39 PM »

KRKATE 0.026469 for 8V.

Rick
Logged
lepatron972
Full Member
***

Karma: +3/-16
Offline Offline

Posts: 92



« Reply #13 on: October 26, 2016, 01:11:49 PM »

On 8P KRKATE 0.024480 on 8P with 031L
Logged

lepatron972
lepatron972
Full Member
***

Karma: +3/-16
Offline Offline

Posts: 92



« Reply #14 on: October 26, 2016, 01:14:27 PM »

it is calculated based on reading and fkkvs intake area flowmeter and FT
Logged

lepatron972
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.137 seconds with 16 queries. (Pretty URLs adds 0.009s, 0q)