Flashing and tweaking a GIAC tuned B5 S4

Pages: [1]

« previous next »

Author

Topic: Flashing and tweaking a GIAC tuned B5 S4 (Read 5990 times)

yti21x7

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Flashing and tweaking a GIAC tuned B5 S4 « on: November 13, 2011, 11:43:11 AM »

I'm looking to correct a couple of annoyances in my AWE tuned Stage 3 B5 S4. I've heard GIAC does things that make it hard to modify their builds, but at this point my question is if I use the nefmoto software and take an image of the GIAC tuned box will that image work if I just flash it unmodified to another ECU to play with? I guess the alternative would be to start with one of the images here and start developing things more from scratch.


	Logged

yti21x7

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: Flashing and tweaking a GIAC tuned B5 S4 « Reply #1 on: November 14, 2011, 03:14:40 PM »

Well, the test ECU took the GIAC flash without an error but the car doesn't start so something appears not to have worked. I read in another thread that some of the GIAC flashes inhibit reading but I didn't get any errors when I read out the flash of the source ECU. I guess my question at this point is there any other way to try this? Should I try something other than the nefmoto software to do the flash?


	Logged

julex

Hero Member

Karma: +79/-4
Offline

Offline

Posts: 923

	Re: Flashing and tweaking a GIAC tuned B5 S4 « Reply #2 on: November 18, 2011, 03:12:33 PM »

Too many things that with be wrong with it. For starters, I would take that image and compare it to known build like M-box to see if it resembles it at all. For all we know, unless you read it off in boot mode with galletto, the tune might have served you bogus data, scrambled data or encrypted image for which you might require EEPROM content moved to new ECU moved as well for proper decryption....

The flashed ECU, does nefmoto communicate ok with it after flash or is it a brick now?


	Logged

yti21x7

Newbie

Karma: +0/-0
Offline

Offline

Posts: 17

	Re: Flashing and tweaking a GIAC tuned B5 S4 « Reply #3 on: November 21, 2011, 06:22:08 PM »

Well, it completed the flash w/o any errors but I didn't check it again with nefmoto after that. I think I did a Vag scan after it didn't start and it was clean, no errors. For now I just put the source ECU back in until I get time to work with it again.


	Logged

infinkc

Full Member

Karma: +6/-1
Offline

Offline

Posts: 94

	Re: Flashing and tweaking a GIAC tuned B5 S4 « Reply #4 on: November 28, 2011, 01:43:05 PM »

Quote from: yti21x7 on November 21, 2011, 06:22:08 PM

it needs the eeprom data also.


	Logged

f up your ecu, i can help http://nefariousmotorsports.com/forum/index.php/topic,892.0title,.html

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 02:37:53 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search