Pages: [1]
Author Topic: M3.8 boost threshold  (Read 2742 times)
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 122


« on: July 06, 2020, 12:17:53 PM »

Hi,
Could somebody tell me name of maps to disable/raise overboost thereshold in M3.8? I tried GDKLDOB, ELDOB and GNLDOB without any result..
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 798


« Reply #1 on: July 06, 2020, 12:33:26 PM »

Hi,
Could somebody tell me name of maps to disable/raise overboost thereshold in M3.8? I tried GDKLDOB, ELDOB and GNLDOB without any result..

Try LDSMXN........
Logged
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 122


« Reply #2 on: July 06, 2020, 02:32:18 PM »

already tried... Still getting fuel cut after ~0.2 ms deviation between requested and actual load
Logged
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5839


« Reply #3 on: July 06, 2020, 02:56:37 PM »

What load are you hitting?
If you are hitting 12.75 then that will be the problem.
Why do you have deviation?

In all the times I've tuned these with various turbo setups I never had this problem.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
kacperoooni
Full Member
***

Karma: +9/-2
Offline Offline

Posts: 122


« Reply #4 on: July 07, 2020, 02:03:30 AM »

What load are you hitting?
If you are hitting 12.75 then that will be the problem.
Why do you have deviation?

In all the times I've tuned these with various turbo setups I never had this problem.
It's almost 9.55 across the whole rpm - stage 1. I needed to touch KFLDTV because without it I have boost oscillations. After getting it tuned the car seems to drive okay until the conditions outside change... Then again boost oscilations and overboost in result, fuel cut etc. The logging frequency is really low so I can't tune it like with me7 logger. The code I am getting with fuel cut is 00544 - Maximum boost pressure exceeded
 
« Last Edit: July 07, 2020, 05:04:06 AM by kacperoooni » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.047 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)