Pages: 1 2 [3]
Author Topic: RAM variables  (Read 21372 times)
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5790


« Reply #30 on: January 30, 2017, 02:51:07 AM »

The mirror is not strictly read-only, but you are much better off using the subroutines provided, than try to reverse engineer how you have to write it.
And if you do you will find the routines anyway Cheesy
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Teitek
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 21


« Reply #31 on: January 12, 2018, 01:26:28 PM »

Hi, one question.

What software use for make a RAM dump and locate the eep mirror?

I tried with me7logger but is laborious.

Regards
Logged
prj
Hero Member
*****

Karma: +903/-420
Online Online

Posts: 5790


« Reply #32 on: January 13, 2018, 08:04:12 AM »

Reverse engineer EEPROM R/W subroutines and you will have the location.
It's different in every binary. Scanning ram is a pretty stupid approach.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 16 queries. (Pretty URLs adds 0s, 0q)