Pages: [1]
Author Topic: Having trouble with argdub and 07k906032P  (Read 3270 times)
1gcrazy
Full Member
***

Karma: +0/-3
Offline Offline

Posts: 99


« on: December 05, 2016, 08:28:14 AM »

So I finally got 1.4 to connect to this Ecu. Pulled the resistor off the back. Once it starts going through it's thing I get an error code error=0x70C01 searching chip_select pin... fail.
Thoughts?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)