Pages: [1]
Author Topic: V6/VR6 24V Cheap tools  (Read 7886 times)
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 394



« on: December 10, 2016, 02:37:05 PM »

Has anyone used the cheap ebay tools for flashing these ME7.1.1.'s? If so which ones, what did you change, more detailed aspects?

I know that, for example, on ST10's you might need to use something like x-prog on a budget to change mcu aspects as required, or certain tools giving you the mcu read etc, but wondering what you've done on the earlier ones with the cheap tools?

Thanks
« Last Edit: December 22, 2016, 09:35:54 AM by RBPE » Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Online Online

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: December 10, 2016, 02:59:00 PM »

mpps
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: December 10, 2016, 05:05:12 PM »

mpps

Pretty horrible for ME7.1.1 in my experience (via OBD). It will allow you to make a full backup of an ST10 ecu (in bootmode), though.
« Last Edit: December 10, 2016, 10:53:25 PM by vwaudiguy » Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 394



« Reply #3 on: December 10, 2016, 06:05:52 PM »

mpps

Which ones/what have you done with MPPS FB? They seem to do well on the 1.8T's, all derivatives of the C166 family I suppose.
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Online Online

Posts: 1401


mk4 1.8T AUM


« Reply #4 on: December 11, 2016, 01:53:43 AM »

the last one
022906032DP
TT 3.2 VR6 DSG

w st10 / c167 units inside

works pretty well but slowly
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 394



« Reply #5 on: December 11, 2016, 07:08:40 AM »

the last one
022906032DP
TT 3.2 VR6 DSG

w st10 / c167 units inside

works pretty well but slowly

Cool, thanks.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #6 on: December 11, 2016, 02:15:51 PM »

the last one
022906032DP
TT 3.2 VR6 DSG

w st10 / c167 units inside

works pretty well but slowly

OBD?
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
fknbrkn
Hero Member
*****

Karma: +176/-18
Online Online

Posts: 1401


mk4 1.8T AUM


« Reply #7 on: December 11, 2016, 04:22:07 PM »

OBD?
yes
and succesfully bootmode with kkl cable and 95040 tool  (95p08 eeprom)
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 394



« Reply #8 on: December 12, 2016, 06:44:34 PM »

yes
and succesfully bootmode with kkl cable and 95040 tool  (95p08 eeprom)


Have you done iop load changes over OBD with it?
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Online Online

Posts: 1401


mk4 1.8T AUM


« Reply #9 on: December 12, 2016, 08:54:54 PM »

emissions only
Logged
Mikhail
Full Member
***

Karma: +2/-4
Offline Offline

Posts: 136


« Reply #10 on: December 12, 2016, 11:16:50 PM »

032cb st10c167 (a3 -04) mpps v12 boot more. Tried obd with mpps and nefmoto, not working. Some friendly guru would hint a code patch to allow the obd work.
Logged
jameswalker
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 39


« Reply #11 on: January 11, 2017, 04:59:39 PM »

I successfully used galletto (on the bench) with ME 7.1.1 G. MPPS via OBD did not work for me.
Logged
THANAS
Jr. Member
**

Karma: +3/-2
Offline Offline

Posts: 43

Yes.


« Reply #12 on: January 12, 2017, 01:41:57 AM »

MPPS via bootmode works for flashing over OBD. Reading of the ecu can be done with MPPS over OBD without bootmode.
Logged
jameswalker
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 39


« Reply #13 on: January 12, 2017, 04:38:28 PM »

MPPS via bootmode works for flashing over OBD. Reading of the ecu can be done with MPPS over OBD without bootmode.

Which version, 16 or 18?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.043 seconds with 16 queries. (Pretty URLs adds 0.00099999999999999s, 0q)