NefMoto > Technical > Tuning > KUMSRL: Calc <> Value in Binary File?
Pages: [1]
« previous next »
Author Topic: KUMSRL: Calc <> Value in Binary File?  (Read 5702 times)
jpurban
Jr. Member
**

Karma: +5/-0
Offline Offline

Posts: 40
« on: December 13, 2016, 05:13:38 PM »
Out of my 996TT file...  

KUMSRL  is 0.001432, but the calc'ed value, as described in the FR, suggests it should be 0.001399 (3.606 Liters / 2578 ).  

This isn't rounding error - the difference is 15% - since 0.001400 is an available value that is much closer.  So, I'm guessing it is an intentional deviation from the FR.

Has anyone else noticed this difference in their "application" versus the suggested FR value?

Perhaps the factory tuners are including manifold volume (Vs) in addition to cylinder displacement (Vh)?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: December 13, 2016, 05:29:00 PM »
Quote from: jpurban on December 13, 2016, 05:13:38 PM
Perhaps the factory tuners are including manifold volume (Vs) in addition to cylinder displacement (Vh)?

Doubful. It is used to convert load->airmass and back, which is not related to manifold volume.

I'd be very wary of those sigfigs, though, the rounding in WinOLS is done in a very bad way; it is fixed point, not floating point.

Multiply your scalar by 100 or even 1000 and see if you get 1.400 or 1.432
« Last Edit: December 13, 2016, 05:30:32 PM by nyet » Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
jpurban
Jr. Member
**

Karma: +5/-0
Offline Offline

Posts: 40
« Reply #2 on: July 06, 2017, 12:15:09 AM »
Quote from: nyet on December 13, 2016, 05:29:00 PM
Doubful. It is used to convert load->airmass and back, which is not related to manifold volume.

I'd be very wary of those sigfigs, though, the rounding in WinOLS is done in a very bad way; it is fixed point, not floating point.

Multiply your scalar by 100 or even 1000 and see if you get 1.400 or 1.432


Nyet, you're a wizard.  Thanks for the advice... fucking fixed point math.  WinOLS rounded the factor from .0000078125 (1/128,000) to 0.000008.  15% rounding error.  Ridiculous.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: July 06, 2017, 09:55:34 AM »
Quote from: jpurban on July 06, 2017, 12:15:09 AM

Nyet, you're a wizard.  Thanks for the advice... fucking fixed point math.  WinOLS rounded the factor from .0000078125 (1/128,000) to 0.000008.  15% rounding error.  Ridiculous.

Yea, it is unconscionable. Truly lazy programming.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
STEVEPHILP
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 70
« Reply #4 on: July 08, 2017, 03:59:26 AM »
I've just checked mine. Exactly the same. 0.000008

But in checking, I've discovered that my 2401cc Volvo S60 T5 has the exact same KUMSRL as the 2521 S60R.

In effect, it's using kumsrl of (2.521/2578) from the factory... What reason would Volvo do this?
Logged
Prettys Womans in your town
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #5 on: July 08, 2017, 09:20:04 AM »
Quote from: STEVEPHILP on July 08, 2017, 03:59:26 AM
I've just checked mine. Exactly the same. 0.000008

Please read the post above about sigfigs. Multiply the scalar of the map by 1000 - the result won't be 0.008

Quote from: jpurban on July 06, 2017, 12:15:09 AM
WinOLS rounded the factor from .0000078125 (1/128,000) to 0.000008.  15% rounding error.  Ridiculous.

Read this again until it makes sense to you Tongue
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
STEVEPHILP
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 70
« Reply #6 on: July 09, 2017, 01:35:33 AM »
Yes NYE I'm aware of that. I understood the first time.

My point reiterated is thus:

The corrected KUMSRL value is exactly the same for the 2.521l R engine and the 2.401l T5 engine.

So the 2.521/2578 is translated to the T5 file. It's widely known that the T5 engine map is pretty much a detuned/neutered R map.

So I'm asking if there might be a particular reason they did this??
Logged
Prettys Womans in your town
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #7 on: July 09, 2017, 01:39:31 AM »
Quote from: STEVEPHILP on July 09, 2017, 01:35:33 AM
Yes NYE I'm aware of that. I understood the first time.

My point reiterated is thus:

The corrected KUMSRL value is exactly the same for the 2.521l R engine and the 2.401l T5 engine.

So the 2.521/2578 is translated to the T5 file. It's widely known that the T5 engine map is pretty much a detuned/neutered R map.

So I'm asking if there might be a particular reason they did this??



Ah. I understand. Likely outright laziness. There are enough other MAF->load and load->MAF corrections going on pretty much all over the place that have to be tuned anyway, so changing KUMSRL isn't really a priority (much like KRKTE seems to be all over the map compared to the theoretical flow of a given an injector, and a million other fueling maps have to be tuned anyway, so why futz with getting KRKTE dead bang on theoretical?).

Honestly, within 5-10% is actually more than sufficient, IMO.

I could be wrong, though.
Logged
ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
contrast
Full Member
***

Karma: +20/-3
Offline Offline

Posts: 215
« Reply #8 on: July 09, 2017, 05:50:50 AM »
Volvo engineers were just lazy. Its evident in many other modules/maps too.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 12:58:45 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)