Pages: [1]
Author Topic: Me7.1 lean spots  (Read 3579 times)
ricekikr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 104


« on: December 16, 2016, 09:47:27 PM »

What would be the best way to enrich some lean spots?

Also why does afr (uego) vary at the same boost/rpm. This is on a completely stock tt 225, tune and all.

Ie. 1st 2nd 3rd gear pull =11.5-12.5 afr
But 3rd gear pull from low rpm 13.5+afr.

Boost also sometimes hits 15psi but normally settles at 13psi
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: December 16, 2016, 09:50:24 PM »

logs please
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #2 on: December 17, 2016, 02:27:33 AM »

TT 225 on a ME7.1?
Logged

I have no logs because I have a boost gauge (makes things easier)
ricekikr
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 104


« Reply #3 on: December 18, 2016, 08:32:07 AM »

I'll post logs next week when i get back to the car.

Yup tt 225 7.1
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)