Pages: [1]
Author Topic: Yo Canada.  (Read 105303 times)
mikeb52
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 98


« on: June 25, 2014, 04:13:13 PM »

An empty board is like an empty Timmy's cup,, just sad.
So, I am Canadian, to quote a cool commercial, and I am finally about to try to pull my ecu program from my 2001 jetta ecu, eliminate the immo, the sai codes, I think there aere two, my emission stuff, and the asr anti slip control functions. I would also like to re identify the ecu to the new car it's going into ( 1990 Corrado), vin wise for clean air test purposes.
I have learned about the process for the immo, but not the rst so will be looking for any help I can find.
I have the dongle, the nefmoto flash software installed, and will be trying to open the ecu tonight.
This thread will chronical the learning and success, or failure of my efforts.
Cheers all.
Mike B
Logged
Lavabo68
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6



« Reply #1 on: April 07, 2015, 12:31:51 PM »

Hi

im from Canada too, Quebec  french canadian!!

Im playing with my mk4 cluster full FIS

Trying to learn  how to play with those eeprom hehe
Logged

Westfalia 1973 swap tdi AHU
Jetta wagon 2003 tdi euro spec
dnenov7
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 38


« Reply #2 on: May 10, 2015, 07:05:48 AM »

Hi

im from Canada too, Quebec  french canadian!!

Im playing with my mk4 cluster full FIS

Trying to learn  how to play with those eeprom hehe



he he I'm from montreal Wink
Logged
hackish
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 56


« Reply #3 on: October 22, 2015, 07:03:18 AM »

he he I'm from montreal Wink

Pays du Quebec.
Logged
jogtx16v
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 124



« Reply #4 on: October 22, 2015, 07:49:48 AM »

du quebec moi aussi, je suis ca.
Logged
DutchCanadian
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #5 on: January 07, 2016, 06:57:44 PM »

An empty board is like an empty Timmy's cup,, just sad.
So, I am Canadian, to quote a cool commercial, and I am finally about to try to pull my ecu program from my 2001 jetta ecu, eliminate the immo, the sai codes, I think there aere two, my emission stuff, and the asr anti slip control functions. I would also like to re identify the ecu to the new car it's going into ( 1990 Corrado), vin wise for clean air test purposes.
I have learned about the process for the immo, but not the rst so will be looking for any help I can find.
I have the dongle, the nefmoto flash software installed, and will be trying to open the ecu tonight.
This thread will chronical the learning and success, or failure of my efforts.
Cheers all.
Mike B

I am here now eh! From Durham Ontario, Volvo S70 T5 Tuning and improving
Logged
Madmechanic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #6 on: March 12, 2016, 05:09:55 PM »

Here from Belleville. More of a Starbucks fan. B5 "eh"4 driver. I'm an automotive tech with an interest in electronic and reverse engineering.
Logged
jaymemaurice
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 14


« Reply #7 on: April 27, 2016, 08:05:15 PM »

I'm from Kitchener, Ontario area. I do all kinds of stupid projects
Logged
birchbark506
Sr. Member
****

Karma: +4/-8
Offline Offline

Posts: 300


« Reply #8 on: June 12, 2016, 01:53:57 PM »

i'm from Saint John New Brunswick
Logged
LeaperV12
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #9 on: July 04, 2016, 02:47:23 PM »

Toronto Area. New to VW software tuning - 1.8T AWM
Logged
birchbark506
Sr. Member
****

Karma: +4/-8
Offline Offline

Posts: 300


« Reply #10 on: August 06, 2016, 09:20:34 AM »

Anyone in Canada selling a real bdm100 reader
Logged
akro007
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« Reply #11 on: October 03, 2016, 01:48:18 PM »

salut a tous je suis du quebec aussi...
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 19 queries. (Pretty URLs adds 0s, 0q)