Pages: [1] 2
Author Topic: Winter and ME7.5 enrichment for E85?  (Read 12276 times)
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« on: December 19, 2016, 02:08:28 PM »

Hey. I am looking a map/factor for (winter) cold start, immediately after star (motor running). But I can not find it.
I have a picture (log) with additional information. It will sort out the problem. I need the address for a map(s)/factor. My English is...poor.
Ecu: 8E0909518M 0002 0261207778 363466

Who knows ME7.5 well?
« Last Edit: March 08, 2017, 06:28:29 AM by Antsu_FI » Logged
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #1 on: December 21, 2016, 02:57:20 PM »

I have noticed that, map from 18FF4 and 19084 will only affect a few minutes after start-up. Not immediately after start-up.

Does not have any special men here for ME7.5, only ME7.1?
« Last Edit: December 21, 2016, 03:14:20 PM by Antsu_FI » Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556


« Reply #2 on: December 22, 2016, 12:11:28 AM »

You are looking for warm up maps

KFFWL
Logged
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #3 on: December 22, 2016, 04:48:24 AM »

Pido, thank you for your answer.
Yes, I am... I'll do a A4_B6_AVJ_xxx.kp for WinOLS but it is really lowly yet.

This is why I need the address for map(s). It also helps if someone tells the map(s) size to me, for example 8 x 8.
I believe that I can handle everything else.

I hope that we'll meet again.
BR. Antsu.

« Last Edit: December 23, 2016, 02:02:21 AM by Antsu_FI » Logged
OTO
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #4 on: December 28, 2016, 09:29:34 AM »

Terve.

check thease adresses
kffwl_0 0x18B63
kffwl_1 0x18BF3

map size 12x12
Logged
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #5 on: December 31, 2016, 07:12:36 AM »

OTO, thanks for the good information. I am very grateful.
I found those maps. Now, I must raise values. At first, maybe 10-30%.

I (WinOls) found more maps. What might be these maps from 18C83 and 18D13 12x12?
What could be their effects if I raise these values?
« Last Edit: January 08, 2017, 10:33:46 AM by Antsu_FI » Logged
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #6 on: January 07, 2017, 03:44:10 AM »

Last week was really cold, about -20 C. I was raised values of 18B63 18BF3 18C83 18D13 about +30%, but it did not help.
The engine was started but then stopped as before.


« Last Edit: January 31, 2017, 08:25:46 AM by Antsu_FI » Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #7 on: January 07, 2017, 03:51:02 AM »

OTO, thanks for the good information. I am very grateful and happy now.
I found those maps. Now, I must raise values. At first, maybe 10-30%.

I found more fun. What might be these maps from 18C83 and 18D13 12x12?
What could be their effects if I raise these values?

why on earth would you change the values in a map that you have no idea what it is?

Do you realize how many maps there are in ME7.5?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #8 on: January 07, 2017, 04:11:48 AM »

Nyet, I think about 70-110 maps. I need some information, just because I write here...
Am I on the wrong page?
« Last Edit: February 21, 2017, 05:07:15 AM by Antsu_FI » Logged
prj
Hero Member
*****

Karma: +905/-420
Offline Offline

Posts: 5790


« Reply #9 on: January 07, 2017, 07:34:05 AM »

There is a limit on minimum req lambda, and you will need to adjust that limit.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #10 on: January 07, 2017, 08:33:13 AM »

Ok. Thanks Prj. I need the address for WinOls to find the right point or map.

I found something... LAMLGFKT 1x1 was 0.7031. I think value is a sufficiently low?
LAMMN was 0,94995. Maybe it is good, I do not know.
« Last Edit: March 08, 2017, 06:34:31 AM by Antsu_FI » Logged
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #11 on: January 19, 2017, 11:07:06 AM »

Last weekend I got down to the value 0.766 to 0.719 but it did not help.
Cold start is still bad, if the weather is cold (< +5 C).  A mixture is still too lean immediately when I go on the road to drive.
Also, I had already raised values from maps 1127F 11329 113D3 1147D about +20%.

New note and new try to start (was -15C).
Look my logs with additional note.

This guy has the same problem as I have.
http://nefariousmotorsports.com/forum/index.php?topic=2774.0

Therefore looking for KFFWLW?
what these data/startpoints mean on the KFWKSTT_x and why six (0,4,8,12,16,20) datapoins for 4 sylinder engine?
A little help would be nice...
« Last Edit: March 07, 2017, 06:03:09 AM by Antsu_FI » Logged
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #12 on: March 27, 2017, 12:34:55 AM »

Hello all.
Nothing new here Sad Summer is coming... Smiley
The discussion may be closed.

R. Antsu_FI
« Last Edit: March 27, 2017, 12:37:28 AM by Antsu_FI » Logged
Jim_Coupe
Hero Member
*****

Karma: +16/-12
Offline Offline

Posts: 663



« Reply #13 on: March 27, 2017, 05:02:48 AM »

eeeeh nope.. LOL  Im struggeling still... its 4 degrees here... I have tried to raise the KFFWL and no success.. Guess i have to try harder.. lol
Logged

E85oholic
Antsu_FI
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 20

I hope that ME7.5 would be an open system :)


« Reply #14 on: March 27, 2017, 10:25:37 AM »

eeeeh nope.. LOL  Im struggeling still... its 4 degrees here... I have tried to raise the KFFWL and no success.. Guess i have to try harder.. lol

Hi Jim_Coupe. I have tried to raise the KFFWL too and no success Wink
I think to solve this problem (my problem) does not KFFWL...

Maybe the KFWKSTT.

If someone solves this my problem then please inform me of it.
Otherwise the discussion is closed and waiting for the next winter.

R. Antsu_FI
« Last Edit: March 30, 2017, 03:39:54 AM by Antsu_FI » Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)