Pages: [1]
Author Topic: No Logging possible on 47Z907551N (2.7TT-Manual-BES 250HP)  (Read 1013 times)

Karma: +0/-0
Offline Offline

Posts: 8

« on: January 02, 2017, 03:45:57 AM »

Hello Guys!
thanks in Advance for your great forum!

on my 47Z907551N ecu the me7logger seems to be not working.

at first, creating the ecu file it finds definitions and entries,
after creating a log definition it finds all definitions either.
the file is in the ecu-folder.

editing the config file for logging the wanted parts, it starts the logging but timeouts in the car.

the com error is ok, im not on the car right now. but with the VCDS Cable in FrankensteinMode it will try to recieve logging, but runs in timeout,
same wit that simple kkl vag 409 cable.

does anybody can tell me the reason?

may i have to name the file "ecu.bin"?

thankyou very much!

i will try change some rights for the folder.

Big Thanks!
Hero Member

Karma: +344/-40
Offline Offline

Posts: 8030

« Reply #1 on: January 02, 2017, 06:33:23 PM »

Use VisualME7Logger.

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Jr. Member

Karma: +8/-0
Offline Offline

Posts: 33

« Reply #2 on: June 15, 2017, 12:09:09 AM »

The apears to be that COM port is incorrect.

Check in Device Manager the port assigned to the attached cable.

Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 17 queries. (Pretty URLs adds 0s, 0q)