Pages: 1 [2]
Author Topic: Spark cut rev limiter ME7  (Read 14986 times)
vwnut8392
Sr. Member
****

Karma: +18/-7
Offline Offline

Posts: 271


« Reply #15 on: January 10, 2017, 11:47:00 AM »

well i guess there are officially 2 methods to achieve the same thing. you could say it is nice to have options.
Logged
vwnut8392
Sr. Member
****

Karma: +18/-7
Offline Offline

Posts: 271


« Reply #16 on: January 13, 2017, 05:14:52 PM »

I attempted to modify the PHP script that auto patches the BIN files with spark cut rev limiter in place of the coolant temperature check at the beginning. i tested the script on a 1mb file and it seems to work fine. the RPM constant for the rev limiter is the last 2 pairs of bits (its a 16bit value with LSB checked and the equation for it is 0.25 * X in tunerpro). if anyone wants to give it go and report back if it works please do. the spark cut limiter is set to 6600 which is 200RPM less than the stock fuel cut limiter. if you dont want the spark cut rev limiter raise the value higher than your stock fuel cut limiter or 10,000RPM or simply patch with the original patcher that doesnt give this option.

Run this just like the other launch.php.
c:\php launch_LMTR.php (dump.bin) (dump.ecu)
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 282


« Reply #17 on: January 16, 2017, 09:55:45 AM »

same just exe file
Logged
vwnut8392
Sr. Member
****

Karma: +18/-7
Offline Offline

Posts: 271


« Reply #18 on: January 17, 2017, 01:57:57 PM »

same just exe file

Thanks for the update on this!
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 18 queries. (Pretty URLs adds 0s, 0q)