Here goes, I've been working on this for a little while and hope this can help someone. This was all generated by ME, so there may be some mistakes but I did the best job I could.  Let me know if you find any, and I will update this/fix it as time permits. I organized as best I could, still needs a little work, but here it is. Any help would be greatly appreciated!!

***Update 12-19-11***
New map pack- Organized/fixed minor mistakes
CSV.file for those that use earlier version WinOLS/TunerPro

***Update 12-30-11***
Updated map pack- FINALLY defined "PROKONAL" function (still unsure from address 181A2-181AB)
Updated (same as map pack) CSV.file
Added a read me for CSV.file because some people might not know (I didn't!)

***Update 01-04-12***
Updated map pack, had a very great member disassemble "PROKONAL" (readiness) bits to be sure

                         ****THANK YOU setzi62****

Updated (same as map pack) CSV.file

***Update 01-10-12***
Updated map pack, defined all axis in all the 2d and 3d maps.

For now I'm pretty done. (Time to get back to what I came here in the first place to do... tune the damn car!!) This should have more than enouph in it, if you see anything missing/wrong please let me know. Enjoy!!

Thanks for the reply, on second thought though I don't really think it matters to find these bits unless a mil or cel is thrown correct?, in which case it's easy enouph to code out via Tony's post about it. 

Thanks for this. Came in really handy in defining another file. Lots of good maps.
Enough maps for a Stage 3 

That's great

It looks like you have the load axis for KFFDLBTS/KFLBTS wrong. It should be 1D26A not 1D26E, I think. That or TABGTS is in the wrong place.

These Passat/Audi files are a rare breed. They are completely different than the MKIV/TT counterparts. Such a pain to define.

So I had a look this morning and everything seems to be in the right place? Unless TABGBTS is at 1D1FA? I don't think it is, but if you could have another look I would greatly appreciate it. I'm pretty sure that the axis for KFFDLBTS and KFLBTS are correct. Whenever you have time, thanks!

Sheeewwww.... I've been looking at it trying to figure out what I've done wrong for the past 30 minutes!! It's ok, gave me a chance to finally figure how to do screen shots! On a side note, do you have any idea the where the "x" axis is for KFLDIMX located at 1EA5E? Thats been driving me crazy for a while? Only if you have time, of course, thanks!

That's funny, I originally had it at 1352E, which is the same as your 13546, and wasn't 100% sure. I'll take that, thank you!

Rob have you manually checked that all of the PROKONAL bits are correct? I don't want to use a bad base