Pages: [1]
Author Topic: ME7.5 KFLBTS Map  (Read 6827 times)
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39


« on: January 31, 2017, 12:25:45 PM »

Could someone tell me if this map is properly defined and if it is, explain to me how the left hand column is derived?  I expected it to be load%.  This is from the me7.5 A4 stage one project xdf.



Logged
NOTORIOUS VR
Administrator
Hero Member
*****

Karma: +58/-7
Offline Offline

Posts: 1056


« Reply #1 on: January 31, 2017, 01:10:07 PM »

That doesn't like like KFLBTS to me.
Logged

SCHNELL ENGINEERING BLOG ·  STANDALONE ECUS · TUNING · DYNO · WIRING · PARTS · VEMS
Google Talk: NOTORIOUS.VR
n00bs start here: http://s4wiki.com/wiki/Tuning
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #2 on: January 31, 2017, 02:39:34 PM »

at least not a correctly defined one
Logged
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39


« Reply #3 on: January 31, 2017, 02:40:55 PM »

Agreed.  I'm certainly a newb but I'm trying to get a handle.

After adding the correct number of rows I think it might be the correct table location as the lamba values look like what I'd expect for BTS but the Y axis is not properly defined.  Looks like I need SRL12GKUW?  The xdf had SRL12GKUB defined; not sure what that is.

Quote
KFLBTS

Shares the Y-axis (called "sampling points for mixture control SRL12GKUW") with:

KFFDLBTS

If anyone has the location or could point me to the right place I'd appreciate it although I don't know as if I necessarily need it.
Logged
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39


« Reply #4 on: February 03, 2017, 10:01:45 AM »

Figured this out.

Load Axis SRL12GKUB @ 0x26E9A

This should probably be moved to the definition forum section.




Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #5 on: February 06, 2017, 08:36:59 AM »

KFLBTS
Shares the Y-axis (called "sampling points for mixture control SRL12GKUW") with:
KFFDLBTS.

Figured this out.
Load Axis SRL12GKUB @ 0x26E9A
This should probably be moved to the definition forum section.

Just a dumb question how do you know from hexdump, which is and where is located the proper axis of that map?
Logged
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39


« Reply #6 on: February 07, 2017, 08:48:36 AM »

I used a definition file from a different software version and compared to the one I wanted to use.  Basically, I followed this...https://www.youtube.com/watch?v=0dkuoFh2foQ&feature=youtu.be
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #7 on: February 07, 2017, 06:37:51 PM »

I used a definition file from a different software version and compared to the one I wanted to use.  Basically, I followed this...https://www.youtube.com/watch?v=0dkuoFh2foQ&feature=youtu.be

GIN+ I really appreciate the help but my concern it is mainly axis of a any map, in other words how do you locate the right axis of any map in a ME7 hexdump?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #8 on: February 07, 2017, 11:29:45 PM »

GIN+ I really appreciate the help but my concern it is mainly axis of a any map, in other words how do you locate the right axis of any map in a ME7 hexdump?

There is no fixed idiot proof simple way to do this.

Look for patterns that match a known file, look for axis data right before the map, and finally disassemble the ASM.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #9 on: February 08, 2017, 05:36:09 AM »

There is no fixed idiot proof simple way to do this.
Look for patterns that match a known file, look for axis data right before the map, and finally disassemble the ASM.

Ok understood, thanks for the comment.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 16 queries. (Pretty URLs adds 0s, 0q)