Pages: [1]
Author Topic: Cant Read ECU  (Read 11626 times)
fischkopf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« on: February 05, 2017, 10:59:21 AM »

Hi,
i have tried to read the Skoda Fabia I 1,9 TDI 2001 ECU
038906019AF
When i set up the memory layout and try to read the ecu it sounds like the ecu gets restarted and i can hear something like a pump..
But after a few messages, something like check security communication fails... First i thought maybee there is a cable problem?
I use a FTDI / LM339 Cable, what i presume should work.. Is there maybee a different ept/driver bundle that fixes my problems?
Thanks
Logged
h100vw
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #1 on: February 06, 2017, 04:47:58 AM »

Hi,
i have tried to read the Skoda Fabia I 1,9 TDI 2001 ECU
038906019AF
When i set up the memory layout and try to read the ecu it sounds like the ecu gets restarted and i can hear something like a pump..
But after a few messages, something like check security communication fails... First i thought maybee there is a cable problem?
I use a FTDI / LM339 Cable, what i presume should work.. Is there maybee a different ept/driver bundle that fixes my problems?
Thanks


It only works on ME7 mate/
Logged
fischkopf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: February 06, 2017, 12:06:40 PM »

It only works on ME7 mate/
I tought nefmoto works whit EDC15?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: February 06, 2017, 04:30:34 PM »

I tought nefmoto works whit EDC15?

No, it will not.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
fischkopf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #4 on: February 06, 2017, 11:57:14 PM »

How can i read EDC15?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #5 on: February 07, 2017, 03:23:23 AM »

How can i read EDC15?

With another tool that supports EDC15
Logged
fischkopf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #6 on: February 07, 2017, 05:02:51 AM »

With another tool that supports EDC15
Wich one you suggest? If possible i would prefere to use my ftdi dumb cable...
I have tried galletto but nothing happens....
Can Vag k+can commander do this?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #7 on: February 07, 2017, 11:37:50 PM »

Kess, MPPS etc.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
fischkopf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #8 on: February 08, 2017, 12:24:14 AM »

Kess, MPPS etc.
Is there oune i can use whit ftdi cable?
Logged
fischkopf
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #9 on: February 08, 2017, 04:57:24 AM »

I have tried Galletto, but no luck, do i need to flasch on bench by pulling the program pin to ground?
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #10 on: February 08, 2017, 07:57:37 AM »

I have tried Galletto, but no luck, do i need to flasch on bench by pulling the program pin to ground?
boot mode with galletto will work
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #11 on: November 08, 2017, 03:20:32 AM »

Now I am confused with this:

boot mode with galletto will work
Galletto (even the clones and old ones) work on EDC15 on bench, with "normal" protocol. Successfully a 100-times.
Why you propose BootMode for flashing ?

AFAIK bootmode is just necessary, if the EDC15 is bricked?!
But I never tryed to re-cover with bootmode option of Galletto. I though this only works on ME7..

Are you able to re-cover a EDC15 with ME7-BooMode-function of Galletto too ?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #12 on: November 11, 2017, 03:22:27 PM »

i tried MPPS on a 2001 mk4 jetta 1.8T and its unable to read just write
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #13 on: November 11, 2017, 08:24:31 PM »

i tried MPPS on a 2001 mk4 jetta 1.8T and its unable to read just write

You have to use a different protocol than what you would normally choose. I can't remember at the moment which I use.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #14 on: November 11, 2017, 11:36:29 PM »

ok if you remember please let me know
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)