Pages: [1]
Author Topic: me7.5 Retaining returnless fuel system with high boost??  (Read 3299 times)
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« on: February 06, 2017, 07:38:55 AM »

Hi guys I am wondering if anyone here has kept their returnless fuel system in their b6 a4??Reason why I ask is because adding a return line solves the fpr issue however it increases fuel temp as fuel is being circulated to and from fuel tank.Also cause more fuel vapors in the tank causing the evap to cycle more frequently.So in theory isn't it better to keep the returnless??I know the stock system has a static 4bar fpr inside the fuel filter and that this poses an issue with higher boost levels,causing fuel pressure to drop.However if  the fuel filter with a 6.4bar internal fuel pressure reglator was installed that would technically resolve the fuel pressure drop even with 2bar of boost no???Now the question is can a surge tank with inline pump be run in this configuration??Furthermore would any changes need to be made in the ecu to compensate for the increase in static fuel pressure??
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #1 on: February 06, 2017, 01:35:52 PM »

Your decision.

You want returnless, you had better be able to tune for it.

Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« Reply #2 on: February 06, 2017, 05:33:25 PM »

I would like to keep the returnless.Just less things to change.Surely all the big names out there keep the returnless system no??So theres gotta be a way to compensate for it.
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #3 on: February 06, 2017, 05:57:22 PM »

Yes, everything is there to tune returnless... it doesn't change much, it is just a bit more work
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 15 queries. (Pretty URLs adds 0s, 0q)