Pages: [1]
Author Topic: Simos 6.22 Flashing/Cloning  (Read 4113 times)
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60


« on: February 10, 2017, 09:42:44 AM »

How is everyone cloning Simos 6.22 - Audi A6 ECU?

I have heard clone BDM100 can work, but I haven't found coverage in software.

suggestions please? I have Fvdi, bdm100, fgtech to work with. All clones.

Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: February 10, 2017, 09:50:25 AM »

it works. coverage is disguised, so to speak.
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60


« Reply #2 on: February 14, 2017, 08:19:10 AM »

it works. coverage is disguised, so to speak.

with 1255 CMD? Ive tried to read as other ecus and nothing works. Could you point me in the right direction? I'm stumped.
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60


« Reply #3 on: February 16, 2017, 09:03:36 AM »

I managed to get BDM100 to fully read it with v1255 as BMW/Siemens MSV70/MSS70 and the connections shown above.
Logged
Hollywood
Full Member
***

Karma: +6/-1
Offline Offline

Posts: 60


« Reply #4 on: February 16, 2017, 02:06:25 PM »

Also needed to copy 95320 manually with eeprom reader. Failure message in CMD for eeprom write protect, but wrote flash and AM29BDD160GB with out an issue.
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #5 on: February 16, 2017, 03:02:00 PM »

if you receive any read/write error, you are doing it wrong.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 17 queries. (Pretty URLs adds 0s, 0q)