Pages: [1]
Author Topic: Can someone help me with the correct format to enter the Chip Select Pin?  (Read 6484 times)
SteveAR
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 103



I have two ECM's.   I was able to connect to one of them (ME7.1.1 2.7T Audi Allroad) using this command:

me7eeprom.exe --OBD -r -p 3 read.bin

The software connected and extracted a bunch of information. (VIN/motor/softcode) and saved the eeprom data to the read.bin file.

I then decided to connect to a different ECM out of a 4.2L allroad.  I once used a different tool to connect, and the CS this ECM needed was 6.3.

How do I put that switch into the command line? I see in the help menu there's --CSpin

I've tried a bunch of things (--CSpin 6.3 / --CSpin p6.3 / --CS6.2 / --CSp6.2) but none are recognized by the software.  Can someone give me the correct CS entry format?

Thanks!
Logged
thedrill
Full Member
***

Karma: +12/-3
Offline Offline

Posts: 139



« Reply #1 on: February 20, 2017, 10:22:37 PM »

Have you tried the Me7Gui? It works great, just select the tick boxes you want and it does it for you.
Logged
SteveAR
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 103


« Reply #2 on: February 24, 2017, 06:01:27 AM »

I haven't seen that version yet but I will check it out.  I eventually dug up an older post of mine where someone gave me the correct format.  So I've been working in the command prompt. GUI's are nicer though
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #3 on: February 24, 2017, 06:10:05 AM »

you need to include the chip kind too
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
SteveAR
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 103


« Reply #4 on: February 24, 2017, 07:49:12 AM »

Yes I did that as well.  I've been able to talk to my ECM with the ME7EEPROM TOOL. Thank you

me7eeprom.exe --bootmode 95P08 --CSpin P6.3 -r -p5 eeprom.bin
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 18 queries. (Pretty URLs adds 0s, 0q)