mattytdi
Jr. Member
Karma: +0/-0
 Offline
Posts: 49
|
 |
« on: February 25, 2017, 12:51:25 PM »
|
|
|
Good day all.
I've been doing some reading through the various posts regarding low load, lean cruising, through modifying closed/open loop activation, controlled by RLLRUN.
I'm using an ME7.5 with 8E0909518AK software, with a fair amount of custom tuning that I have performed, and quite happy with the car's performance increases. Many thanks to the guidelines and input from the community!!
The xdf package I have been using, I obtained trough the community as well, and it has been very helpful. I have added to the xdf package slightly, including copy and pasting a RLLRUN parameter from another xdf package, but it seems the addresses may not be correct for my software/ecu. I'd like to attach the xdf I have been using for input from those who have a better idea about their creation, or if someone has an xdf pack with working RLLRUN address, I could paste that parameter to my working xdf pack... Or I welcome any additional input from those in the know.
Much appreciated!!
|
|
|
|
|
Logged
|
|
|
|
|
_nameless
|
|
« Reply #1 on: February 26, 2017, 05:21:53 AM »
|
|
|
12362 starting address
|
|
|
|
|
Logged
|
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/ |
|
|
mattytdi
Jr. Member
Karma: +0/-0
Offline
Posts: 49
|
|
« Reply #2 on: February 26, 2017, 10:40:16 PM »
|
|
|
Thank you Marty
I have no idea what that means...
I'm pretty decent with cars/tuning, not so great with hex...lol
|
|
|
|
|
Logged
|
|
|
|
|
|
|
nyet
|
|
« Reply #4 on: February 28, 2017, 10:45:51 AM »
|
|
|
I'm pretty decent with cars/tuning, not so great with hex...lol
Not sure what "not great with hex" means. |
|
|
|
|
Logged
|
|
|
|
mattytdi
Jr. Member
Karma: +0/-0
Offline
Posts: 49
|
|
« Reply #5 on: February 28, 2017, 09:14:15 PM »
|
|
|
Thanks Guys... "not great with hex" means... I don't yet speak "computer code language" well, perhaps my calling hex a language indicates my lack of knowledge of the address codes used within the ECU.
In fact, I expected the address to be more like: 0x19FA9... as is illustrated on the address within the xdf... but.. i have been given a whole number address... not sure where that number fits to create the xdf parameter.
|
|
|
|
|
Logged
|
|
|
|
|
|
mattytdi
Jr. Member
Karma: +0/-0
Offline
Posts: 49
|
|
« Reply #7 on: February 28, 2017, 10:15:10 PM »
|
|
|
lol, really??
That simple...??
|
|
|
|
|
Logged
|
|
|
|
|
|
mattytdi
Jr. Member
Karma: +0/-0
Offline
Posts: 49
|
|
« Reply #9 on: March 01, 2017, 05:17:36 PM »
|
|
|
That did it.. thank you very much guys.. Was more complicated by myself than it really is.
Address 0x12362 displayed the 6% factory value.
And thanks for the hexidecimal wiki link, that also made things much more clear.
|
|
|
|
|
Logged
|
|
|
|
joshuafarwel
Full Member
Karma: +10/-1
Offline
Posts: 90
|
|
« Reply #10 on: January 27, 2023, 12:13:25 AM »
|
|
|
lambda constant address for 518ak is
0x72456 16bit
offset: X*0.0002441406
now you can leave rllrun stock and cruise lean with precision
|
|
|
|
|
Logged
|
|
|
|
|
