Pages: [1]
Author Topic: TT 1.8t 224HP AMU Narrowband to Wideband conversion  (Read 560 times)
crackerx
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« on: March 01, 2017, 11:16:37 PM »

Hello

My name is Mihai and i`am engineer electronist.I want to convert my audi TT 1.8t 224HP engine code AMU (car from unitedstates) from Narrowband to Wideband
car have quattro esp and cruise control (if is inportant)

I read si many things on forums but to start that conversion i need some shure tested ecu numbers that will fit to my car and after conversion the quattro / cruise control / ESP / electric ventlators will work normally

now the original ecu is 8N0906018K  bosch hw number 0261206894

if someone can helpme with some codes for ecu / lambda etc
and i also ask if a must chance the MAF


Many Thnaks
Logged
Tiero
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #1 on: April 18, 2017, 09:29:47 AM »

Hey,

This is probably going to get send to noob questions but basically what you need is:
1. A Wideband ECU BEA Engine code should be a drop in (you can use some of the golf ECUs but you will need to reprogram them)
2. A wideband harness
3. A wideband O2 sensor

You don't need to change the MAF. Also, google is your friend.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)