TT 1.8t 224HP AMU Narrowband to Wideband conversion

Pages: [1]

« previous next »

Author

Topic: TT 1.8t 224HP AMU Narrowband to Wideband conversion (Read 11169 times)

crackerx

Jr. Member

Karma: +1/-10
Offline

Offline

Posts: 43

	TT 1.8t 224HP AMU Narrowband to Wideband conversion « on: March 01, 2017, 11:16:37 PM »

Hello

My name is Mihai and i`am engineer electronist.I want to convert my audi TT 1.8t 224HP engine code AMU (car from unitedstates) from Narrowband to Wideband
car have quattro esp and cruise control (if is inportant)

I read si many things on forums but to start that conversion i need some shure tested ecu numbers that will fit to my car and after conversion the quattro / cruise control / ESP / electric ventlators will work normally

now the original ecu is 8N0906018K bosch hw number 0261206894

if someone can helpme with some codes for ecu / lambda etc
and i also ask if a must chance the MAF

Many Thnaks


	Logged

Tiero

Newbie

Karma: +0/-0
Offline

Offline

Posts: 3

	Re: TT 1.8t 224HP AMU Narrowband to Wideband conversion « Reply #1 on: April 18, 2017, 09:29:47 AM »

Hey,

This is probably going to get send to noob questions but basically what you need is:
1. A Wideband ECU BEA Engine code should be a drop in (you can use some of the golf ECUs but you will need to reprogram them)
2. A wideband harness
3. A wideband O2 sensor

You don't need to change the MAF. Also, google is your friend.


	Logged

Magovit

Newbie

Karma: +0/-2
Offline

Offline

Posts: 4

	Re: TT 1.8t 224HP AMU Narrowband to Wideband conversion « Reply #2 on: June 01, 2017, 10:56:05 PM »

The best way to do it is use an Wideband Controller with one Narrow output.
Obviously you will use the wideband sensor on the controller, and plug the output narrow signal on the stock ecu.

My suggestion: https://www.14point7.com/products/spartan-lambda-controller-2


	Logged

THANAS

Jr. Member

Karma: +3/-2
Offline

Offline

Posts: 43

Yes.

	Re: « Reply #3 on: June 01, 2017, 11:24:44 PM »

I would say that isn't the best way as the narrowband ecu doesn't function the same way or use the narrowband input in the same way as the wideband.


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Online

Online

Posts: 12270

	Re: « Reply #4 on: June 02, 2017, 12:05:51 PM »

Quote from: THANAS on June 01, 2017, 11:24:44 PM

I would say that isn't the best way as the narrowband ecu doesn't function the same way or use the narrowband input in the same way as the wideband.

This is correct. You generally cannot use the 14point7 NB output to feed the NB input on ME ECUs. Impedance matching is one of the main problems, but there are others.


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 27, 2024, 04:06:41 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search