Pages: [1]
Author Topic: CAN IDs for common values in Passat B5 2001?  (Read 9432 times)
jrelder
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 36


« on: March 02, 2017, 07:06:19 AM »

Hi,

First off, this is for a Passat B5 2001.

I am currently trying to build a display for data from the CAN bus, and I would like to know if anyone can provide me with the CAN message IDs for the following values:

Speed,
RPM,
Oil Temp,
Coolant Temp,
Outside Temp,
Inlet Temp,
Gear,
Oil Level,
Washer Fluid Level,
Brake Fluid Level,
Fuel Level
MFA Button UP,
MFA Button Down,
MFA Button Reset,
Instantaneous MPG,

And possibly any trip data (distance, time, MPG etc.).

I don't know if all this data is available on the CAN bus, so please correct me if so...

Thanks in advance!
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #1 on: March 02, 2017, 12:24:49 PM »

FR page ~1666
there is no data for lower 50% of your list
Logged
sparrowdclxvi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #2 on: May 30, 2017, 03:01:58 PM »

FR page ~1666
there is no data for lower 50% of your list

What's FR?
Logged
fknbrkn
Hero Member
*****

Karma: +176/-18
Offline Offline

Posts: 1401


mk4 1.8T AUM


« Reply #3 on: May 30, 2017, 03:27:28 PM »

funktionsrahmen
Logged
sparrowdclxvi
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 8


« Reply #4 on: May 31, 2017, 02:48:00 AM »

Thanks
Logged
Stoti
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 79


« Reply #5 on: June 27, 2021, 01:15:04 AM »

I know its dead topic but is there any chance to know ACpressure id to build fan control module based on can bus
Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #6 on: June 29, 2021, 11:54:47 AM »

should be part of mClima_1 (0x5E0), startbyte 16, 8 bit lengh, factor 0,2 (AFAIR)
Logged
Stoti
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 79


« Reply #7 on: June 30, 2021, 01:40:43 PM »

Thank you i wil try to sniff for this id to see what happend. Its on 4f with m 7.1.1 and now im simulating 70% pwm on fans to get a/c running. Thank you
Logged
Stoti
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 79


« Reply #8 on: November 16, 2021, 05:51:02 PM »

it was id 3e2  pressure = b3/5 gives Acpressure in Bar comfort databus orange/green orange brown wires .
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)