FT232R Cable not working

Pages: [1]

« previous next »

Author

Topic: FT232R Cable not working (Read 7388 times)

Pasteurised

Full Member

Karma: +1/-3
Offline

Offline

Posts: 90

	FT232R Cable not working « on: March 03, 2017, 01:58:52 PM »

Hey guys, having trouble with this cable and Nefmoto.
The software can see the cable but when i try to connect it gives me the "failed to read test echo from FTDI device" error.
Its definitely in dumb mode.

This is the Device info nefmoto gives me, do i need to change anything in FTprog?

Thanks


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12268

	Re: FT232R Cable not working « Reply #1 on: March 03, 2017, 02:10:58 PM »

Is it connected to a powered up ECU?


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

Pasteurised

Full Member

Karma: +1/-3
Offline

Offline

Posts: 90

	Re: FT232R Cable not working « Reply #2 on: March 03, 2017, 02:17:13 PM »

Thank for the quick reply.

Yes its plugged in and car ignition switched on.

VCDS connects no problem.


	Logged

AARDQ

Sr. Member

Karma: +11/-0
Offline

Offline

Posts: 338

	Re: FT232R Cable not working « Reply #3 on: March 03, 2017, 02:39:44 PM »

On occasion (25% of the time?) I have to put VCDS through Test, save the config and close VCDS and then Nef will see the cable. Has to be plugged into the USB before plugging in to the OBD.


	Logged

Pasteurised

Full Member

Karma: +1/-3
Offline

Offline

Posts: 90

	Re: FT232R Cable not working « Reply #4 on: March 03, 2017, 02:45:16 PM »

ok thanks ill give that a try

plug in usb
plug in obd
run vcds test
run nefmoto


	Logged

Alex90

Newbie

Karma: +0/-0
Offline

Offline

Posts: 4

	Re: « Reply #5 on: March 05, 2017, 04:34:37 AM »

Try without start the cluster ... the cluster is one gateway and sometime block the comunication

Sent from my SM-G930F using Tapatalk


	Logged

moiko

Newbie

Karma: +0/-0
Offline

Offline

Posts: 6

	Re: « Reply #6 on: July 23, 2017, 11:05:19 AM »

Quote from: Alex90 on March 05, 2017, 04:34:37 AM

Try without start the cluster ... the cluster is one gateway and sometime block the comunication

Sent from my SM-G930F using Tapatalk

I have the same problem with my cable and nefmoto. Can you be more specific in how i start without the cluster? Haha i’m sorry it must be a dumb question


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 12:57:50 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search