Pages: [1]
Author Topic: FT232R Cable not working  (Read 6729 times)
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« on: March 03, 2017, 01:58:52 PM »

Hey guys, having trouble with this cable and Nefmoto.
The software can see the cable but when i try to connect it gives me the "failed to read test echo from FTDI device" error.
Its definitely in dumb mode.

This is the Device info nefmoto gives me, do i need to change anything in FTprog?


Thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #1 on: March 03, 2017, 02:10:58 PM »

Is it connected to a powered up ECU?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #2 on: March 03, 2017, 02:17:13 PM »

Thank for the quick reply.

Yes its plugged in and car ignition switched on.

VCDS connects no problem.
Logged
AARDQ
Sr. Member
****

Karma: +11/-0
Offline Offline

Posts: 338


« Reply #3 on: March 03, 2017, 02:39:44 PM »

On occasion (25% of the time?) I have to put VCDS through Test, save the config and close VCDS and then Nef will see the cable.  Has to be plugged into the USB before plugging in to the OBD.
Logged
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #4 on: March 03, 2017, 02:45:16 PM »

ok thanks ill give that a try

plug in usb
plug in obd
run vcds test
run nefmoto
Logged
Alex90
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #5 on: March 05, 2017, 04:34:37 AM »

Try without start the cluster ... the cluster is one gateway and sometime block the comunication

Sent from my SM-G930F using Tapatalk
Logged
moiko
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #6 on: July 23, 2017, 11:05:19 AM »

Try without start the cluster ... the cluster is one gateway and sometime block the comunication

Sent from my SM-G930F using Tapatalk
I have the same problem with my cable and nefmoto. Can you be more specific in how i start without the cluster? Haha i’m sorry it must be a dumb question
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)