Pages: [1]
Author Topic: ECU Pics For Reference and Educational Purposes Only  (Read 12041 times)
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« on: April 18, 2010, 08:05:43 PM »

So I recently Purchased this Ecu.To test Reading and Flashing Using Galletto 1260 which is really 1250 or 1245 or whatever you wanna call it.Its a Clone Cable.All of them are the same no difference just the numbers is changed but no difference in the software what so ever.I posted these Pictures just for reference and pretty much just to figure out what each chip does and find out if anyone would care to lend a hand and let me know why there is another chip on the external board wit the eprom on it???Any information would be useful to me and I'm sure everyone on this forum.










« Last Edit: May 27, 2010, 04:23:42 PM by Tony@NefMoto » Logged
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 537


« Reply #1 on: April 19, 2010, 04:59:52 PM »

encryption board, beat for you.  it can still be read though
Logged
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« Reply #2 on: April 19, 2010, 06:50:55 PM »

I do have a successful read for this ecu.The file looks good.However as mentioned I only posted pics for educational purposes and reference.Thanks for the kind words.
Logged
Rick
Hero Member
*****

Karma: +62/-4
Offline Offline

Posts: 704


« Reply #3 on: May 15, 2010, 04:02:09 PM »

I'll be buying a UK S4 later this year, do we know which version of the ECU they come with?  Seems we only really know the map locations of the Mbox?  I'm thinking though, if you used WinOLS you could look for the same maps at addreses near by and then create a definition file for other versions.

Rick
Logged
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« Reply #4 on: July 18, 2010, 12:27:16 PM »

As far as i know all me7.1 s4 ecus are the same or similar any bin file can be flashed to a s4 ecu.you can flash a mbox ecu with hbox file or a abox ecu with a mbox file its just a matter of  swapping mafs for the correct file.Early s4 had bosch mafs and late ones had a hitachi maf.
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +130/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3


« Reply #5 on: July 18, 2010, 02:15:58 PM »

I believe the 1999 S4 in Europe came with an ECU that only had a 512k 29F400 flash chip, while later years had the 1meg 29F800 flash chip.
Logged

Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
ArgDub
Full Member
***

Karma: +60/-1
Offline Offline

Posts: 202


« Reply #6 on: July 18, 2010, 03:29:55 PM »

As far as i know all me7.1 s4 ecus are the same or similar any bin file can be flashed to a s4 ecu.you can flash a mbox ecu with hbox file or a abox ecu with a mbox file its just a matter of  swapping mafs for the correct file.Early s4 had bosch mafs and late ones had a hitachi maf.

Why don't you keep the maf and swap the MLHFM map instead? Would it be doable?

Logged
EuroXs4
Full Member
***

Karma: +15/-31
Offline Offline

Posts: 209


« Reply #7 on: August 12, 2010, 07:22:54 PM »

I would assume Its possible,I havent really looked into this yet But Im sure others have.I believe the Way the inputs are read and calculated is different on the hitachi and the bosch.Im sure that would have to be addressed as well.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 16 queries. (Pretty URLs adds 0s, 0q)