Pages: [1]
Author Topic: Re: Overrun Flames, Gargle, Pop  (Read 5005 times)
mrgabamo
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 18


« on: March 10, 2017, 07:36:49 AM »

realized my problem was KFFDLBTS intervention.

Nyet, I'm sorry about that but I didn't realize I was going against the forum rules. My bad.
« Last Edit: March 16, 2017, 01:06:08 PM by mrgabamo » Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Offline Offline

Posts: 12270


WWW
« Reply #1 on: March 10, 2017, 06:35:21 PM »

Please don't crap into other people's threads. This is your only warning.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
littco
Hero Member
*****

Karma: +52/-7
Offline Offline

Posts: 903


« Reply #2 on: March 11, 2017, 04:48:37 AM »

hey guys, can someone help me on this
- changed kfzwmn on the first 2 lowest from 2500 and up
- changed both kfzwop and kfzwop2 -15 on the first load column and -6 on the second from 2500 and up
- changed cwsawe to 1 to enable kftvsa
- changed kftvsa to 2.5s from 1500 up
- left kfnwegm almost stock, just leveled all to 1500

my issue is that sometimes between gear changes under mid-high load Im experiencing some jerkness almost like agressive timing retard, after releasing the gas and step back on it again everything is fine.
looking at my timing retard cant see nothing abnormal happening. did this happen to someone too?

maybe its the antijerk kicking in
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)