Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
please help po600 I'm stranded flashed .bin went for test drive shut car off
Pages: [
1
]
« previous
next »
Author
Topic: please help po600 I'm stranded flashed .bin went for test drive shut car off (Read 3664 times)
ben2401
Newbie
Karma: +1/-0
Offline
Posts: 4
please help po600 I'm stranded flashed .bin went for test drive shut car off
« on: March 18, 2017, 08:56:59 AM »
I shut the car off, parked, went to start back up and it would only crank. Nefmoto will not connect, ELM 327/ Torque Pro shows po600. Tiptronic PRNDL is lit up in the screen. Clearing code makes cluster and shift console lights flash 3x. How can I get the car running? Do I need a tow?
Logged
Mikhail
Full Member
Karma: +2/-4
Offline
Posts: 136
Re: please help po600 I'm stranded flashed .bin went for test drive shut car off
« Reply #1 on: March 18, 2017, 10:22:34 AM »
Flash boot mode. This thread is galletto download
http://nefariousmotorsports.com/forum/index.php?topic=639.0title=
You probably can use the same cable than nefmoto.
Logged
adam-
Hero Member
Karma: +123/-33
Offline
Posts: 2179
Re: please help po600 I'm stranded flashed .bin went for test drive shut car off
« Reply #2 on: March 18, 2017, 02:12:08 PM »
Checksum error and now you have a brick. Bootmode recovery.
Logged
ben2401
Newbie
Karma: +1/-0
Offline
Posts: 4
Re: please help po600 I'm stranded flashed .bin went for test drive shut car off
« Reply #3 on: March 18, 2017, 04:23:22 PM »
Thanks for the replies. Got a Mbox 4D0 906 018M ecu at the junkyard for $150 and it seems to work fine for now. Pretty sure CHbox and Mbox for 2001 A4 1.8t AWM are interchangeable. Would it matter if tip or not? Do I need to recode anything? Really lucky as I need the car tonight. After thinking it over I may have flashed my stock CHbox ecu with a euro file with immo - would that be the cause of the no start and solid PRNDL lights? Do I need a Galetto 1260 and corresponding software to access boot mode or does Nefmoto support it now? Would like to get the original ecu up and running as a backup/test mule. Thanks again.
Logged
adam-
Hero Member
Karma: +123/-33
Offline
Posts: 2179
Re: please help po600 I'm stranded flashed .bin went for test drive shut car off
« Reply #4 on: March 20, 2017, 02:57:06 AM »
Stop flashing random files onto it and you'll be fine.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 24, 2024, 07:31:35 AM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
