Ok.I help you.For log leave KFLDRL and KFLDIMX map oryginal values only change KFLDRAPP map. It is 8x8 map so change only 4 last row. Ex 70%, 80%, 90% and 100% PED values and set there in map percent of DC which you want (Ad you now 10% , 20%, 30% ....etc. ) and save all files as new ( dont overwrite).For LDRPID tool you need 9 files ( log 0% of DC too) and after that set KFLDIMX map as linear ( in 3D view straight line) and then put this one row (all are the same ) to LDRPID tool where is KFLDIMX map (and set axis as you has in your file) and set KFLDRL DC axis as you has in your file and then set RPM scale of main map (you can have other values ) and then load folder with your 9 files (logs) and click GENERATE. Then copy generated map to your tune (KFLDRL map) and flash tune to your car and make logs (don't forget about checksum before you flash your tune.
did not fully understand
after 9 passes and creating a map in ldrpid
made KFLDIMX linear
what to do with KFLDRAPP and CWMDAPP
Should they stay at stock values?
