Pages: [1]
Author Topic: Battery chargers/stabilizers for flashing  (Read 3780 times)
bobbyz0r
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 43


« on: March 23, 2017, 10:03:39 PM »

What do you guys use (if any) while flashing to stabilize battery voltage?

I'm thinking of getting a CTEK MXS25, which does 25A and has the stable 13.6v supply mode.

Mainly looking for ones when flashing over OBD.

Also, anyone using interesting set ups like modified PC PSUs?
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #1 on: March 23, 2017, 10:06:20 PM »

2-5A is enough if all the accessories are off.
Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
bobbyz0r
Jr. Member
**

Karma: +3/-0
Offline Offline

Posts: 43


« Reply #2 on: March 23, 2017, 11:00:11 PM »

2-5A is enough if all the accessories are off.

I'm currently using a cheap manual (thankfully) 2700mA charger, but I plan to flash some newer cars (EDC17, MED17, SIMOS 10/12/18), and don't want to take any chances. Also, my flash tool doesn't show voltage while flashing, which is bloody annoying.

But I agree, for ME7, MED9, etc.., I expect 5A to be plenty.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #3 on: March 24, 2017, 01:20:44 AM »

AliExpress sell LED drivers (12-16v adjustable and up to 50A).  They're about $30.

https://www.aliexpress.com/item/Best-quality-12V-50A-600W-Switching-Power-Supply-Driver-For-CCTV-Camera-CNC-LED-Strip-Lamp/32605745238.html?spm=2114.01010208.8.4.jH9Gru

That's a 600W one, but they do 400, 200, etc.  They regulate really well and pack a good punch.
Logged
chli1976
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« Reply #4 on: March 24, 2017, 10:34:02 AM »

Look for Telvin Doctorcharge 50
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)