Pages: 1 2 [3]
Author Topic: GT Turbos - wastegate preload and tuning/drivability  (Read 27842 times)
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #30 on: November 15, 2012, 01:17:34 PM »

I know, just relaying my partial throttle driving experience on 13lb preload, 16psi boost on external wastegates.
Logged
Rick
Hero Member
*****

Karma: +63/-4
Offline Offline

Posts: 704


« Reply #31 on: November 16, 2012, 08:53:24 AM »

Just finished a tune with 32psi and a 13 psi spring.

Drives beautifully.

Rick
Logged
Bische
Sr. Member
****

Karma: +25/-4
Offline Offline

Posts: 397



WWW
« Reply #32 on: November 16, 2012, 11:16:49 AM »

Anyone want to share some info on how they setup the KFLDIMX and KFLDRL?

I have tuned my KFLDIMX pretty much trial and error and lots of reflashes, and my KFLDRL is not in use at all - I have just done the table linear to the axis.
Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #33 on: November 16, 2012, 09:20:27 PM »

Just finished a tune with 32psi and a 13 psi spring.

Drives beautifully.

Rick
External gate?
Logged
ibizacupra
Full Member
***

Karma: +4/-10
Offline Offline

Posts: 111


« Reply #34 on: November 19, 2012, 03:24:04 AM »

Just finished a tune with 32psi and a 13 psi spring.

Drives beautifully.

Rick

andrews S3 per chance?

 Wink

My own racecar runs tial 44mm external gate, hybrid gt3582
stock seat ibiza n75 controls.. Actuator pressure of 12psi...  26psi from 60% duty cycles.. plenty left in it.
you dont need stuff springs in these gates...

« Last Edit: November 19, 2012, 03:26:16 AM by ibizacupra » Logged
vanrhj
Full Member
***

Karma: +0/-5
Offline Offline

Posts: 55


« Reply #35 on: August 23, 2023, 01:52:39 AM »

andrews S3 per chance?

 Wink

My own racecar runs tial 44mm external gate, hybrid gt3582
stock seat ibiza n75 controls.. Actuator pressure of 12psi...  26psi from 60% duty cycles.. plenty left in it.
you dont need stuff springs in these gates...


[How dit u connect the n75 to the tail 44mm external gate top and bottom ports?]
Logged
Pages: 1 2 [3]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)