Pages: [1]
Author Topic: ME7.5 Wideband ECU  (Read 5576 times)
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« on: March 28, 2017, 04:36:33 PM »

Hey guys, wondering if anyone can confirm if the 06A906032HN and 06A906032HJ are wideband ECU.
I want to buy a spare and clone my BAM ECU.
Thanks
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #1 on: March 28, 2017, 05:25:43 PM »

Yes
Logged
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #2 on: March 28, 2017, 05:57:34 PM »

Awesome thank you!
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #3 on: March 29, 2017, 02:46:13 AM »

Just to be clear, are you buying an ECU with the same part number as your BAM ECU?
Or are you buying a cheaper ECU and cross flashing them?
Logged
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #4 on: March 29, 2017, 03:16:24 AM »

It's a different part number, I have a bench flash setup so plan to flash the eeprom from my 8N0906018H across.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632


« Reply #5 on: March 29, 2017, 08:04:55 AM »

Not sure they are compatible?
Anyone wanna chime in?
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #6 on: March 29, 2017, 08:51:26 AM »

Check bootrom of both flashes (me7check) for your answer.  If they match, there's good chance they can be cross flashed.
Logged
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #7 on: March 29, 2017, 09:17:47 AM »

Managed to find an original .bin for 06A906032HN and compared it to the 8N0906018H, both show Bootrom Version = 05.12
Logged
Pasteurised
Full Member
***

Karma: +1/-3
Offline Offline

Posts: 90


« Reply #8 on: March 30, 2017, 05:27:59 AM »

What is the procedure? Just write the eeprom then write the flash?
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #9 on: March 30, 2017, 08:13:55 PM »

It should not need changes to e2p, just flash the other file.   When doing these types of things, best to have a bench setup so you can revert back if necessary.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 1.647 seconds with 16 queries. (Pretty URLs adds 0.0030000000000001s, 0q)