Pages: [1]
Author Topic: Immo Off Audi TT MK1 AMU  (Read 6315 times)
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« on: April 03, 2017, 08:59:05 AM »

I'm not trying to beg for anything, just looking for a general insight of where I should look.
I am looking for help with an Immo off. I plan to desolder the 95040 EEPROM and read/write to it with a TL866
Doing it for two cars, one is Immo2 other is Immo3

I have a general understanding of coding, but its been a few years.
I plan on simply turning off the Immo, what information should I gather and what tools would you suggest?

I've read the stickies, i know about changing hex and something about -1/-1, but I wanted to know if there was a specific place I should look on here for my specific case?
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #1 on: April 03, 2017, 07:23:37 PM »

ok, tried to do it the soldering way with a tl866a. i have my bin, but it doesnt look like most others? i cloned it, but now the car wont start at all.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2177


« Reply #2 on: April 03, 2017, 11:43:10 PM »

It's not too hard at all.  Read bin in car or on bench with 95040tool.  Adjust IMMO ON/OFF with ME7_95040.  Write back with bootmode.  Smiley

Takes around 5 minutes.
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #3 on: April 04, 2017, 06:14:18 AM »

Well, i did attach the bin in my second post. So I have that.
Problem is that its a 04 instead of an 01/02

Im doing this the soldering way as I don't have the cables for benching atm. ECU is already out of car, ive already copied the bin. I tried soldering the 95040 back in (original) but car wont even start up.
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #4 on: April 04, 2017, 06:55:00 AM »

It's not too hard at all.  Read bin in car or on bench with 95040tool.  Adjust IMMO ON/OFF with ME7_95040.  Write back with bootmode.  Smiley

Takes around 5 minutes.

I have just used the ME7_95040 tool on my .bin and it can't figure out the SKU or anything. I tested the program with a bin I found on here for a similar car (almost same ECU, different ending letter) and the ME7_95040 tool worked with reading that. Any idea why my bin looks so messed up?
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #5 on: April 04, 2017, 01:22:50 PM »

Guess i'll just keep posting updates on things that I find in hopes that someone can enlighten me.

ECU is a 8N0906018T
Immo2

95040 tool doesnt seem to work with immo 2. My 12 and 22 are both 04 instead of what people are saying is 01(On)/02(Off)
It also can't read my SKC/Immo/Vin

Sooooo...
I'm going to go change that 04 into an 01 (-3) and correct my right side by adding +3
Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #6 on: April 11, 2017, 06:33:17 AM »

subtract 2 from 04 @ 12 and 22  and add 2 to the checksum @ 1e and 2e, reason there is an 04 instead of a 01 is that these ecus operate diffenently and only need communication with cluster to start, similart to the audi s4 with "no immobilizer"
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7


« Reply #7 on: April 11, 2017, 01:05:49 PM »

subtract 2 from 04 @ 12 and 22  and add 2 to the checksum @ 1e and 2e, reason there is an 04 instead of a 01 is that these ecus operate diffenently and only need communication with cluster to start, similart to the audi s4 with "no immobilizer"

I ended up fixing it with the -3/+3
This was an immo 2, so 01 is off and 04 is on.

Logged
ice_sar
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18


« Reply #8 on: July 13, 2017, 01:26:14 AM »

I have the same problem on 8N609018AT AUDI TT of AMU engine. Replacement 04 on 01 really works? Thanks
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 16 queries. (Pretty URLs adds 0s, 0q)