Pages: 1 ... 12 13 [14] 15 16 ... 24
Author Topic: DSG DQ250 Tuning  (Read 263026 times)
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #195 on: February 04, 2020, 01:31:59 AM »

0x327F8 lands straight in the middle of a shift map
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #196 on: February 05, 2020, 06:29:02 PM »

how many shift maps are there. i see there looks to be a few but my a2l dose not have it. so i am unsure of the size of them.
Logged
Tezotto01
Full Member
***

Karma: +3/-13
Offline Offline

Posts: 97


« Reply #197 on: February 07, 2020, 06:35:14 AM »

I will try it tomorrow...



Got?
Logged
mantasos
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 8


« Reply #198 on: February 08, 2020, 06:12:28 AM »

BAH... just saw that you were not asking for this.. i confused you for the other member that asked for LC with ESP on...! Anyway..


Got?

Yea mate, please see attached. MAP ID is KusLC_EnLCmitESP_ko
ADDR 309A6 on your file (1byte switch)

You shall fill it with 1 to enable LC with ESP
« Last Edit: February 08, 2020, 06:15:47 AM by mantasos » Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #199 on: March 03, 2020, 03:15:16 PM »

0x327F8 lands straight in the middle of a shift map

how many maps are between these two address?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #200 on: March 08, 2020, 07:14:34 AM »

Is anyone able to help with an answer? I have most of the maps found, beside between them two address. Even map names would help alot.
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #201 on: March 09, 2020, 05:32:33 AM »

Is anyone able to help with an answer? I have most of the maps found, beside between them two address. Even map names would help alot.  had to correct the address in above post its from 327f8 to 328A6 what shifting map would it be?
Logged
Tezotto01
Full Member
***

Karma: +3/-13
Offline Offline

Posts: 97


« Reply #202 on: April 08, 2020, 09:21:33 AM »

BAH... just saw that you were not asking for this.. i confused you for the other member that asked for LC with ESP on...! Anyway..


Yea mate, please see attached. MAP ID is KusLC_EnLCmitESP_ko
ADDR 309A6 on your file (1byte switch)

You shall fill it with 1 to enable LC with ESP

Thank you very much for the answer, but I want to activate the LC with ESP off
Logged
Tezotto01
Full Member
***

Karma: +3/-13
Offline Offline

Posts: 97


« Reply #203 on: April 08, 2020, 10:51:00 AM »

This car did not come with the factory activated LC and I want to make it work.
Logged
d1scussi0n
Jr. Member
**

Karma: +5/-6
Offline Offline

Posts: 34


« Reply #204 on: April 15, 2020, 07:14:12 AM »

For downshift you will need to deactivate the kickdown and for upshift just change the rpm limiters on manual higher than the engine rpm limit.

can someone help me find te rpm limiters on manual on cxx 043c 1111 gearbox? i can provide ori and most of the map pack I made for the one who finds me. thanks
Logged
Floenlive
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 7


« Reply #205 on: April 26, 2020, 03:13:50 AM »

can someone help me find te rpm limiters on manual on cxx 043c 1111 gearbox? i can provide ori and most of the map pack I made for the one who finds me. thanks

What do you want? Rpm limiter in Neutral or gear shift?
Logged
birchbark506
Sr. Member
****

Karma: +11/-11
Offline Offline

Posts: 414


« Reply #206 on: April 27, 2020, 12:00:38 PM »

what maps are needed to get Launch Control to work.  i found KusLaunchNstall_kl and KusLaunchNstallESP_kl but when i went to test it would not work. working on a DQ250 Fxx
Logged
DaBotta
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 4


« Reply #207 on: June 05, 2020, 03:09:36 PM »

I have on my car Golf 5 GTI 2007

DSG HW 02E927770AE and SW 02E300043Q

Can someone help me with a map pack ?

Thank you
Logged
lfml
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 11


« Reply #208 on: June 21, 2020, 02:32:36 PM »

Hi!
Anybody known how to make lc with boost?
Logged
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 114


« Reply #209 on: June 23, 2020, 04:47:01 AM »

Hi!
Anybody known how to make lc with boost?

i think at the moment only TVS , i try it by comparing dq250 from Golf7R but not manage to find it
Logged
Pages: 1 ... 12 13 [14] 15 16 ... 24
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.054 seconds with 14 queries. (Pretty URLs adds 0s, 0q)