Pages: [1]
Author Topic: Immo Help VW Beatle 5cyl 2.5 Lt  (Read 4579 times)
mechtronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« on: April 03, 2017, 10:12:21 AM »

Hi,
looking for some help here on Immo file from VW Beatle ECU number 07K 906 032 B. I remove the E2p 8pin device number ST951603 and read it.
I am NOT sure if I read it right because I read it under the protocol of ST95P08 because can't get the ST951603 on the Library. I hear I can use the 95080
W6 but I am not sure. Also did I need to adapt the new immo off  file from the E2p with the Vagcom? Here is the Binary to see if is right and some body can fix it for Immo off.
Thanks again,


Mechtronic
Logged
f1torrents
Sr. Member
****

Karma: +17/-1
Offline Offline

Posts: 303


« Reply #1 on: April 03, 2017, 12:16:50 PM »

http://nefariousmotorsports.com/forum/index.php?topic=2973.0title=
Logged
mechtronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #2 on: April 10, 2017, 03:16:10 PM »


Hi... I get a use same number ECU remove the e2p device read it and try to turn off the immo by doing this changes on the org bin file.
But Immo light still flashing and car starts and dies all the times. Can any body can check the bins to see if I do it right or wrong. also
I diagnose with VAG COM and flag a fault code 02241 - Engine control data not adapted 000 - - both files from e2p are attached org and Immo off,
any help will be appreciated,
Thanks again,
 




Hi,
looking for some help here on Immo file from VW Beatle ECU number 07K 906 032 B. I remove the E2p 8pin device number ST951603 and read it.
I am NOT sure if I read it right because I read it under the protocol of ST95P08 because can't get the ST951603 on the Library. I hear I can use the 95080
W6 but I am not sure. Also did I need to adapt the new immo off  file from the E2p with the Vagcom? Here is the Binary to see if is right and some body can fix it for Immo off.
Thanks again,


Mechtronic
Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #3 on: April 11, 2017, 06:28:18 AM »

you subtracted bits in the wrong are for checksums  checksums are located at 1e and 2e respectively
Logged
mechtronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #4 on: April 11, 2017, 10:10:58 AM »

you subtracted bits in the wrong are for checksums  checksums are located at 1e and 2e respectively

Hi !! Remove the ST95P08 burn the new file minus one on the right CS locations but no Luck
Car Immo light still flashing with key on. Car starts and die all the time. By any chance is a
way to turn off Immo or is no way to delete it on the e2p eeprom?? thanks again
Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #5 on: April 11, 2017, 01:57:58 PM »

you subtracted bits in the wrong are for checksums  checksums are located at 1e and 2e respectively
here try this one
Logged
mechtronic
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 21


« Reply #6 on: April 13, 2017, 11:36:23 AM »

Hi ,
I just want to thanks you for your help. I burn the new cal file you send me  on the e2p and car starts perfect. I really aprecite your help.  Can you show me the bytes that really defeat the immo in this file. I have some question can I PM you later during the week?  The only thing is the lmmo light on dash still flashing all time ... is a way to fix that? Thanks again
Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 167


« Reply #7 on: April 17, 2017, 07:46:59 PM »

Hi ,
I just want to thanks you for your help. I burn the new cal file you send me  on the e2p and car starts perfect. I really aprecite your help.  Can you show me the bytes that really defeat the immo in this file. I have some question can I PM you later during the week?  The only thing is the lmmo light on dash still flashing all time ... is a way to fix that? Thanks again
you can hit.me up whenever, I may have a solution for immo light
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 18 queries. (Pretty URLs adds 0s, 0q)