Pages: [1]
Author Topic: !!!ME7.1 ECU help!!!  (Read 6987 times)
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« on: April 28, 2017, 06:59:50 AM »

I need an info of the circuit board of a 2.7T ME7.1 ECU. Looking at the pics, maybe many people will answer just look for a new ECU and avoid all the troubles, but that will be my last last last option.
To start I need to know how is the +12V Battery connection and traces in the board of this ECU. Pin #3 is not present textually speaking and I do not have any other similar ECU to trace the pads. My only supposition is a connection to a big transistor in the other side of the board.









Then some advice is really welcome.
Thanks,
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #1 on: May 02, 2017, 06:45:41 AM »

I know that is a really hard and complicated question but nobody knows??? Or anyone with a similar ECU can with me some light about that connection. Thanks,
Logged
gt-innovation
Sr. Member
****

Karma: +60/-89
Offline Offline

Posts: 442


« Reply #2 on: May 02, 2017, 10:40:03 AM »

I know that is a really hard and complicated question but nobody knows??? Or anyone with a similar ECU can with me some light about that connection. Thanks,

I think i have a spare ecu somewhere so i can back trace what you need..Let me know tomorrow from skype.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: May 02, 2017, 10:44:11 AM »

I know that is a really hard and complicated question but nobody knows??? Or anyone with a similar ECU can with me some light about that connection. Thanks,

Nobody bothers to fix an ecu with a burned trace.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #4 on: May 02, 2017, 05:07:58 PM »

It comes down to the fact that these can be found for 25-50 EUR.
For some of us that's less than what we earn hourly. Probably not fixable in an hour, if at all.
No point to do it -> do something more useful and just buy another ecu from ebay.

If you want to learn more about the hardware of the ECU search the forum, some people traced where stuff goes and identified what several IC's do.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
overspeed
Sr. Member
****

Karma: +21/-5
Offline Offline

Posts: 383



« Reply #5 on: May 03, 2017, 07:52:26 AM »

Just to state what are the costs in Brazil:

http://produto.mercadolivre.com.br/MLB-784523337-modulo-de-injeco-audi-a6-s4-27-all-road-4z7-907-551-h-_JM

1 Euro = 3,49 Real

So, R$ 1.999,00 = 572 euros  (and this ECU is not virgin or immo off, the customer will have to pay  for this too)
Logged
eliotroyano
Hero Member
*****

Karma: +47/-7
Offline Offline

Posts: 796


« Reply #6 on: May 03, 2017, 06:30:13 PM »

Friends I understand and accept your comments. This ECUs in my country are very very rare and really expensive. I found some info about main power supply path but ECU continues to not work at all. Last word is a new ECU is needed. Thanks you all.
Logged
TijnCU
Hero Member
*****

Karma: +60/-4
Offline Offline

Posts: 690


flying brick


« Reply #7 on: May 04, 2017, 12:16:13 AM »

Can you work with a replacement?  reflash it and you save much time... lots of 2.7t ecus around 100€ on ebay you can always use the old case if you reflash and copy the eeprom.
« Last Edit: May 04, 2017, 12:24:24 AM by TijnCU » Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.032 seconds with 16 queries. (Pretty URLs adds 0s, 0q)