Hello, sorry wrote incorrect location before. Is is 11F38 or 11F48? I assume Tmar should be 0 deg with 0.75 * Eprom value -48? So 64 is what I should look for?

/Kenneth

Hello,

Maybe the wording was confusing. But the issue is, that due to not knowing RAM locations so I could log everything needed in ME7logger I would need to be able to disable ARMD with 100 % certainty and see if this improves timing oscillations.

One way of killing ARMD with 100 % certainty I assume is raising TMAR sky-high? But for that I would need to know the map location. So what I ask for is map location.

Br. Kenneth

Hello,

Put 100 on last two rows in all three daro maps I had in my software, FF on location 11F38 or 11F48 and underscaled the MAF by some 15 % at highest flows. This resulted in actual load staying below requested load and the timing oscillations ended.

What of these 4 changes was the one killing oscillations I dont know, but now they are gone and I´m pleased.

Thanks!