Pages: [1]
Author Topic: Moates Emulator  (Read 2652 times)
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« on: May 06, 2017, 01:57:20 PM »

Hey Guys ,

I have had a Moates Emulator sitting on my self for a few years decided to put it to work. I m having a issue where i can get the car running & make changes with PRJ's tool. Problem is i can not connect with vcds get a short to ground fault when running. I can connect to car with engine off as soon as i turn it on light turns red no coms. Tried a stock ecu no issues. Also when the emulator is in every cycle it bricks have to unplug ecu wait a minute clear eeprom code and she fires up. The e2p is already in test mode I m using a byteswap board . Anyone have some insight ?

Video Action :

https://youtu.be/bsMlG1FPi0E
Logged
vdubnation
Turboman
Global Moderator
Sr. Member
*****

Karma: +49/-2
Offline Offline

Posts: 433


« Reply #1 on: May 10, 2017, 05:16:14 PM »

Problem resolved car had underlying conditions that caused no k line coms .
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)