Pages: [1]
Author Topic: DODGE HEMI THROTTLE BODY 80mm on 1.8T me7.5 ECU configuration  (Read 3789 times)
Rocky
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 24



Hi there

I know it's not proper to install such big throttle body for 1.8T.
It's mounted with Integrated Engineering Manifold in 1.8T and i know there are projects with good configuration works no problem.

Is there anyone who can prepare me dodge hemi throttle body 80mm(inner), 86mm(outer) calibration for 1.8t me7.5?
Not for free of course.

Is there something to change more than:
KFMSNWDK
KFWDKMSN

PID?

Best Regards
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #1 on: May 09, 2017, 05:19:46 AM »

Hi there

I know it's not proper to install such big throttle body for 1.8T.
It's mounted with Integrated Engineering Manifold in 1.8T and i know there are projects with good configuration works no problem.

Is there anyone who can prepare me dodge hemi throttle body 80mm(inner), 86mm(outer) calibration for 1.8t me7.5?
Not for free of course.

Is there something to change more than:
KFMSNWDK
KFWDKMSN

PID?

Best Regards

To start your values are very wrong
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
yxx499
Full Member
***

Karma: +4/-10
Offline Offline

Posts: 106


« Reply #2 on: May 09, 2017, 11:38:48 AM »

The values of KFMSNWDK can not exceed 100%, and same for KFWDKMSN.
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 401


« Reply #3 on: May 10, 2017, 12:53:35 PM »

The values of KFMSNWDK can not exceed 100%

 Huh

Is there something to change more than:
KFMSNWDK
KFWDKMSN

Those two are supposed to be inverse of each other, yours look off.
You also might want to look at WDKUGDN.

Logging msdk_w and mshfm_w along with RPM and wdkba & pressure vars might help to find proper values.
« Last Edit: May 10, 2017, 01:00:31 PM by nubcake » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0s, 0q)