Pages: 1 ... 5 6 [7] 8
Author Topic: LC/NLS  (Read 12147 times)
Kompiesto
Full Member
***

Karma: +2/-2
Offline Offline

Posts: 74


« Reply #90 on: October 24, 2019, 02:30:55 AM »

if is ST10 ecu You need do ASM mods.
Logged
LuckkyLuke
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 13


« Reply #91 on: October 24, 2019, 02:53:05 AM »

if is ST10 ecu You need do ASM mods.

What is ASM mods. Where can I find a description?

Thank you very much.
Logged
adam-
Hero Member
*****

Karma: +96/-24
Offline Offline

Posts: 1823


« Reply #92 on: October 24, 2019, 04:52:26 AM »

What is ASM mods. Where can I find a description?

Yeaaaahhh, with that question, you're gonna be up shit creek with no paddle.
Logged
Marty
Hero Member
*****

Karma: +139/-98
Offline Offline

Posts: 1407


« Reply #93 on: October 24, 2019, 05:00:29 AM »

this is not st10 fwiw
Logged

nyet
Administrator
Hero Member
*****

Karma: +440/-60
Offline Offline

Posts: 10034


WWW
« Reply #94 on: October 24, 2019, 09:04:48 AM »

Merged with master "I ABSOLUTELY HAVE TO HAVE LC" noob thread
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
LuckkyLuke
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 13


« Reply #95 on: October 24, 2019, 01:07:40 PM »

Probably nobody will help.

:-)
Logged
BlackT
Hero Member
*****

Karma: +17/-10
Offline Offline

Posts: 510



« Reply #96 on: November 12, 2019, 01:28:01 AM »

At many places it have warning that LC/NLS will burn coil pack, or output in ECU...
LC/NLS sets  tsrldyn = 0, what schould be dwell time set to zero. Acording to that when tsrldyn is set to 0, there schould not be output voltage from ECU to charge coils. So how that can burn anything?
Logged
gt-innovation
Sr. Member
****

Karma: +45/-32
Offline Offline

Posts: 389


« Reply #97 on: November 12, 2019, 07:41:08 AM »

At many places it have warning that LC/NLS will burn coil pack, or output in ECU...
LC/NLS sets  tsrldyn = 0, what schould be dwell time set to zero. Acording to that when tsrldyn is set to 0, there schould not be output voltage from ECU to charge coils. So how that can burn anything?

That is only specific to the code that floats around here and only for old coilpacks and 29f400 ecus...

There are many ways to build boost and make a proper lc with 0 impact on the engine reliability... of course if you need flames and stuff on stock turbo and engine at so point you need to replace both of them but again if done correctly most of the things will last long enough...

st10 or not code does the same thing on retard the ignition through the array or any other algorithm and do fuel or ignition cut at +100 or 150 rpm.
You can set the boost while doing that and deactivate b_kr or dmd algorithms while you are running the code.
i have posted something on st10 thread which applies to older me7.1.1 with c167 as well...

More help you will not get for free...So help yourself by reading around here
Logged
BlackT
Hero Member
*****

Karma: +17/-10
Offline Offline

Posts: 510



« Reply #98 on: November 12, 2019, 10:15:12 AM »

That is only specific to the code that floats around here and only for old coilpacks and 29f400 ecus...

There are many ways to build boost and make a proper lc with 0 impact on the engine reliability... of course if you need flames and stuff on stock turbo and engine at so point you need to replace both of them but again if done correctly most of the things will last long enough...

st10 or not code does the same thing on retard the ignition through the array or any other algorithm and do fuel or ignition cut at +100 or 150 rpm.
You can set the boost while doing that and deactivate b_kr or dmd algorithms while you are running the code.
i have posted something on st10 thread which applies to older me7.1.1 with c167 as well...

More help you will not get for free...So help yourself by reading around here
Hmm I think you didn't understand my question. I was only asking about coils and Mosfets in ECU. Not about build boost,flames, engine reliability or something else.

When we set tsldyn to zero that mean mosfet in ECU is like open switch?
Logged
dimitry00
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 6


« Reply #99 on: November 20, 2019, 05:47:50 AM »

can somebody help me tune my file its for a auq 180hp engine 1.8t former owner said it was Already chipped but i whant some options along with it pops and bangs and launch control so if someone could help me with a file i can put in vag ecd myself and tune it myself or tune one for me that would be great because im stuck on having no definitions for the file and thus cannot see what im actually editting i do know what to edit just not the xdf file if someone could make me 2 tuned files 1 with launch control and the other with launch control and pops and bangs that would be great motor is stock no downpipe or other turbo yet
Logged
dimitry00
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 6


« Reply #100 on: November 20, 2019, 05:49:55 AM »

can somebody make a tune file or xdf file something to put in vag ecd or tuner pro to so i can edit myself or tune the file for me 2 files one with launch control and the other with both launch control and pops and bangs please im really stuck at the xdf not knowing what to do
Logged
Marty
Hero Member
*****

Karma: +139/-98
Offline Offline

Posts: 1407


« Reply #101 on: November 20, 2019, 06:05:18 AM »

Sure here you go
Logged

dimitry00
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 6


« Reply #102 on: November 20, 2019, 06:26:03 AM »

forgot the bin file
Logged
woj
Sr. Member
****

Karma: +28/-1
Offline Offline

Posts: 429


« Reply #103 on: November 20, 2019, 06:28:04 AM »

forgot the bin file

Also lots of punctuation marks :/
Logged
dimitry00
Newbie
*

Karma: +0/-15
Offline Offline

Posts: 6


« Reply #104 on: November 20, 2019, 06:38:39 AM »

Also lots of punctuation marks :/

what do you mean
Logged
Pages: 1 ... 5 6 [7] 8
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 17 queries. (Pretty URLs adds 0s, 0q)